23244 CA/W33 Spherical Roller Bearing Overview
Built inside the wide 232 dimension series at 220 × 400 × 144 mm (reference mass 80.4 kg), the 23244 CA/W33 (23244CA/W33) double-row spherical roller bearing accommodates shaft deflection and combined radial-axial shock loading in primary crushers, heavy reducers, and mill drives. Per ZQM Bearings’ 259-page general catalogue and online database, it provides a basic dynamic load rating Cr of 2,020 kN, basic static load rating C0r of 3,400 kN, and limiting speeds of 670 rpm (grease) / 900 rpm (oil).
23244CA/W33 Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 220 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 400 mm |
| Boundary Dimensions & Weight | Width (B) | 144 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 80.4 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 2020 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 3400 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 670 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 900 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 238 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 382 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 4 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 3 mm |
| Calculation Factors | Calculation factor (e) | 0.35 |
| Calculation Factors | Axial load factor (static) (Y0) | 1.9 |
| Calculation Factors | Axial load factor (Y1) | 1.9 |
| Calculation Factors | Axial load factor (Y2) | 2.9 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
23244 CA/W33 Designation & Structural Features
The designation 23244 CA/W33 identifies a 232-series heavy wide-section spherical roller bearing for a 220 mm shaft (bore code 44 × 5 = 220 mm). In ZQM’s standard catalogue execution, CA denotes a one-piece machined solid brass cage paired with symmetrical rollers and integral inner-ring retaining flanges, while W33 denotes a circumferential lubrication groove and three equally spaced oil holes in the outer ring for direct relubrication. Standard stock is supplied with a straight cylindrical bore; where sleeve mounting is required, the 232 series uses a 1:12 tapered bore (K) rather than the 1:30 (K30) taper used in 240/241 series—see our K vs. K30 tapered bore & sleeve guide and C3 radial clearance selection guide.
| Catalogue Model (220 mm Bore) | Dimensions & Mass | Load Ratings & Grease Speed |
|---|---|---|
| 23244CA/W33 (Selected) | 220 × 400 × 144 mm · 80.4 kg | Cr 2,020 kN · C0r 3,400 kN · 670 rpm |
| 23044CA/W33 | 220 × 340 × 90 mm · 29.7 kg | Cr 1,090 kN · C0r 1,980 kN · 950 rpm |
| 23144CA/W33 | 220 × 370 × 120 mm · 53.0 kg | Cr 1,570 kN · C0r 2,710 kN · 710 rpm |
| 24144CA/W33 | 220 × 370 × 150 mm · 66.7 kg | Cr 1,800 kN · C0r 3,200 kN · 710 rpm |
| 22244CA/W33 | 220 × 400 × 108 mm · 59.0 kg | Cr 1,570 kN · C0r 2,430 kN · 850 rpm |
Brand Cross-Reference & Equivalent Designations
The table below lists major bearing manufacturer designations sharing the same 220 × 400 × 144 mm ISO 15 nominal boundary dimensions as 23244 CA/W33 (for methodology, see our ISO bearing cross-reference guide):
| Manufacturer | ISO Nominal Reference | Verification Scope Before Replacement |
|---|---|---|
| ZQM Bearings | 23244 CA/W33 / 23244 CA/W33 C3 |
ZQM factory catalogue specification; confirm clearance group (CN/C3/C4) and bore type |
| SKF | 23244 CC/W33 / 23244 CCK/W33 | Standard / Explorer geometry; confirm stamped steel vs. brass cage and C3 suffix |
| FAG / Schaeffler | 23244-B-MB / 23244-BEA-XL-MB1 | Machined brass cage 232 series; verify lubrication groove (S) and clearance suffix |
| NSK | 23244CAME4 / 23244CAMKE4 | CAME4 / E4 outer-ring groove and holes; verify cylindrical vs. 1:12 K tapered bore |
| NTN | 23244EMD1 / 23244EMKD1 | D1 lubrication groove and holes; confirm internal clearance and sleeve accessory |
ISO Nominal Boundary Disclaimer: Equivalent designations indicate matching ISO 15 nominal boundary dimensions (220 × 400 × 144 mm) only and do not guarantee direct functional interchangeability. Always verify internal cage execution, radial clearance, chamfer geometry, and duty-cycle load ratings against the OEM drawing before ordering.
Industrial Applications & Operating Conditions
With 2,020 kN dynamic capacity and calculation factors e = 0.35, Y1 = 1.9, Y2 = 2.9, and Y0 = 1.9, 23244 CA/W33 is specified across demanding mining and crushing equipment as well as steel, cement, and pulp installations (browse all industrial bearing applications):
| Equipment Position | Dominant Operating Loads | Engineering & Lubrication Notes |
|---|---|---|
| Jaw & Gyratory Crusher Main / Eccentric Shafts | Severe shock radial peaks, housing flexure, abrasive ore dust | Self-aligning spherical raceway compensates shaft bending; specify C3/C4 clearance for heavy press fits |
| Heavy Mining & Cement Mill Gearboxes / Head Pulleys | Continuous high torque at low-to-medium shaft speeds | 400 mm OD and 144 mm width maximize roller load zone compared with narrower 22244 or 23044 units |
| Steel Rolling Mill Auxiliary Drives & Caster Roll Supports | Combined radial-axial loads, scale contamination, thermal cycling | Feed EP grease or circulating oil directly through the W33 outer-ring groove and three oil holes |
| Pulp Refiners & Heavy Paper Mill Press Rolls | Sustained line pressure, moisture ingress, long maintenance intervals | Confirm shaft shoulder da min 238 mm and housing abutment Da max 382 mm on assembly drawings |
Ordering 23244 CA/W33 & Pre-Order Checklist
ZQM Bearings coordinates manufacturing from our Wafangdian production base with export handling in Ningbo and warehousing in Shanghai—supporting single-piece trial validation, mixed-SKU MRO shipments, and recurring OEM supply. Confirm three items before requesting your formal quotation:
| Checklist Item | Details to Confirm | Why It Matters |
|---|---|---|
| 1. Complete Ordering Code | Specify 23244 CA/W33, clearance (CN/C3/C4), cylindrical vs. 1:12 tapered bore (K), and cage confirmation |
Prevents mismatch with adapter sleeves (e.g., H2344 / OH 2344 H for 23244 K—not the shorter H3144 used on 23144 K) or thermal clearance targets |
| 2. Housing & Shaft Abutment | Check da min 238 mm, Da max 382 mm, r1,2 min 4 mm, and ra max 3 mm against drawing | Avoids fillet corner interference and inner-ring creep under heavy radial shock |
| 3. Batch Quantity & Packing | Unit mass 80.4 kg; state quantity, destination port, Incoterms (EXW/FOB/CIF), and inspection scope | Confirms export wooden-case crating, lead time, and dimensional/hardness inspection documentation |
Frequently Asked Questions (FAQ)
What are the exact dimensions, weight, and load ratings of 23244 CA/W33?
Per ZQM Bearings’ online catalogue database, 23244 CA/W33 measures 220 mm bore × 400 mm outside diameter × 144 mm width with a reference mass of 80.4 kg. Its basic dynamic load rating is Cr = 2,020 kN, basic static load rating is C0r = 3,400 kN, and limiting speeds are 670 rpm (grease) and 900 rpm (oil).
How does 23244 CA/W33 compare with 23144 CA/W33 and 24144 CA/W33 on a 220 mm shaft?
All three fit a 220 mm bore, but 23244 CA/W33 uses a larger 400 mm outside diameter (144 mm width) to reach the highest dynamic load rating at 2,020 kN, compared with 1,570 kN for 23144 CA/W33 (370 × 120 mm, 53.0 kg) and 1,800 kN for 24144 CA/W33 (370 × 150 mm, 66.7 kg). Choose 23244 when 400 mm housing radial space is available for maximum roller capacity.
Does the tapered-bore version of 23244 CA/W33 use a 1:12 (K) or 1:30 (K30) taper?
Standard 23244 CA/W33 has a straight cylindrical bore. When a tapered bore is ordered in the 232 series (23244 CAK/W33), it uses a 1:12 taper (K); the 1:30 taper (K30) is reserved for wide 240 and 241 series bearings such as 24144 CAK30/W33.
How should radial clearance and post-mount feeler checks be handled for 23244 CA/W33?
Select CN, C3, or C4 radial internal clearance based on shaft/housing press-fit interference and expected shaft-to-housing temperature differential. On radial spherical roller assemblies, post-mount feeler gauge readings verify mounted residual radial clearance—which must be distinguished from final hot operating clearance under thermal equilibrium.
What details should I provide to cross-check an SKF, FAG, or NSK 23244 replacement?
Share the full stamped designation from your existing bearing (including cage code, clearance group, and cylindrical vs. K tapered bore) along with equipment duty and order quantity. ZQM’s engineering team will cross-check abutment dimensions (da 238 mm, Da 382 mm, ra max 3 mm) and supply specifications before quoting.






