Built strictly to ISO 12240-1 Dimension Series E, the GE60ES-2RS (GE 60 ES-2RS) radial spherical plain bearing supports a robust 60 mm hinge pin inside a 90 mm housing bore, pairing an inner-ring width (B) of 44 mm with an outer-ring width (C) of 36 mm. Equipped with hardened bearing-steel sliding surfaces treated with phosphate and MoS₂, annular lubrication grooves and oil holes, and twin -2RS elastomer lip seals, it is built for heavy agricultural combine header lift cylinders and articulated forestry harvester center-frame joints operating across uneven fields and logging trails.
GE60ES-2RS ISO 12240-1 Nominal Dimensions & Construction
| Specification | Verified Series E Value | Engineering Remarks |
|---|---|---|
| Bearing Code | GE60ES-2RS | ISO 12240-1 Dimension Series E, sealed radial spherical plain bearing |
| Bore Diameter (d) | 60 mm | Nominal chassis / header articulation pin diameter |
| Outside Diameter (D) | 90 mm | Nominal housing clevis bore |
| Inner Ring Width (B) | 44 mm | Full spherical inner ball width |
| Outer Ring Width (C) | 36 mm | Single-fractured outer ring seating width |
| Sliding Contact | Hardened steel-on-steel | Phosphate + MoS₂ running-in layer; periodic EP relubrication mandatory |
| Sealing & Grease Ports | -2RS lip seals + oil grooves & holes | Dual contact seals resisting chaff/sap; inner & outer ring oil channels |
| Load Ratings, Clearance & Tilt | Confirmed on factory drawing | Dynamic/static sliding capacities, radial clearance group & tilt angle issued with quote |
Terrain Twist Articulation, p·v Wear & 90° Fracture Rule
Climbing over tree stumps, deep field ruts, and sloped contours imposes large multi-axis chassis twist on forestry forwarders and wide-cut grain combine headers. With an 8 mm width differential between inner width (44 mm) and outer width (36 mm), the GE60ES-2RS tilts smoothly in any plane without binding heavy welded yokes or inducing bending fatigue in 60 mm pins. Because it functions via direct steel-on-steel spherical sliding, service intervals are governed by specific bearing pressure × sliding velocity (p·v) and field greasing consistency.
During factory assembly, the hardened outer ring is split along a single radial fracture to admit the inner ball. Mechanics pressing GE60ES-2RS into a harvester center pivot or header lift arm must orient that radial fracture at 90° to the primary radial load direction so heavy cantilevered header bounce or timber-grapple jolts never pry the split line apart.
Chaff, Fiber & Tree-Sap Exclusion in Harvest & Forestry Service
Dry grain chaff, wrapped vine fibers, pine resin, and muddy logging-trail runoff destroy unsealed steel bushings within a single harvest season. The dual -2RS contact lip seals sweep across the polished spherical inner ring throughout wide tilting swings, keeping fibrous crop debris and acidic sap outside the lubricated sliding zone while holding tackified EP grease inside the 60 mm joint.
When seasonal pre-harvest maintenance begins, pumping fresh lithium-complex or calcium-sulfonate EP grease through the outer-ring groove flushes out aged lubricant and moisture condensate accumulated during winter storage. Explore off-highway agricultural and forestry machinery supply at our off-highway & heavy industry portal.
GE60ES-2RS Brand Cross-Reference Matrix
| Brand / Standard | Cross-Reference Code | Series E Boundary Notes (60 × 90 × 44/36 mm) |
|---|---|---|
| ZQM / GB/T 9163 | GE60ES-2RS | Hardened steel/steel, phosphate & MoS₂ treated, oil grooves/holes, -2RS seals |
| SKF | GE 60 ES-2RS | Steel-on-steel radial spherical plain bearing with double-sided lip seals |
| INA / Schaeffler | GE60-DO-2RS | Series E maintenance-required steel/steel (DO), twin contact seals |
| IKO | GE60ES-2RS | ISO 12240-1 Series E sealed steel-on-steel joint bearing |
| Fluro | GE 60 ES-2RS | Relubricatable steel/steel spherical plain bearing, -2RS seals |
Interchange Disclaimer: Listed equivalents share nominal ISO 12240-1 Series E external boundaries (60 × 90 × 44/36 mm) only. Seal elastomer cut-resistance against crop fibers, radial clearance group (C2/CN/C3), sliding load ratings, and surface treatment differ across manufacturers and are formally verified via ZQM factory drawing before OEM or fleet release.
Sourcing GE60ES-2RS for Ag/Forestry OEMs & Regional Dealers
Agricultural equipment OEMs, forestry-machine rebuilders, and regional parts distributors ordering GE60ES-2RS should specify seasonal volume forecasts, housing press-fit interference (to verify CN or C3 clearance), and sub-zero or hot-harvest seal requirements. ZQM supplies confirmed factory drawings verifying exact sliding load capacities and tolerances at quotation stage, supporting both single-machine field repairs and container-scale OEM programs. Request pricing via our ZQM quote request page.
GE60ES-2RS Agricultural & Forestry FAQ
Related Selection & Comparison: Compare heavy-duty adjacent pin bores GE50ES-2RS (50 mm) and GE70ES-2RS (70 mm), and review our Quality Control & Hardness Testing Lab standards.
How does the 44/36 mm dual width on GE60ES-2RS benefit forestry harvester articulation joints?
The 44 mm inner ball width extends 4 mm beyond each face of the 36 mm outer ring, providing substantial angular clearance so articulated logging frames and wide combine headers can twist sharply over stumps and furrows without clevis contact.
Can GE60ES-2RS -2RS seals keep fine crop chaff and pine sap out of the sliding race?
Yes. The dual-sided -2RS contact lip seals track the spherical inner ring across its tilt range to block chaff, plant fibers, dust, and wet mud; regular EP grease purging through the ES oil holes further pushes contaminants away from the seal lips.
Which way should the outer-ring radial fracture face when pressing GE60ES-2RS into a header lift arm?
Position the single radial fracture in the outer ring at 90° to the primary radial lift load axis. Keeping the split out of the vertical load zone prevents shock bounce from spreading the outer ring and accelerating wear.
How do buyers obtain verified sliding load ratings and clearance tolerances for GE60ES-2RS?
ZQM confirms exact dynamic and static sliding capacities, radial clearance class, permissible misalignment angle, and phosphate/MoS₂ coating specs directly on the formal factory drawing supplied with your quotation.



