230 SERIES · SPHERICAL ROLLER BEARING

230/1060CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

230/1060CAF3/W33 spherical roller bearing: 1060 mm bore (d), 1500 mm outside diameter (D), 325 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1060 mmD 1500 mmB 325 mmCr 13000 kNMass 1790 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1060D 1500B 325

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1060 mm
Outside diameter D1500 mm
Width B325 mm
Mass1790 kg
Catalogue dynamic load Cr13000 kN
Catalogue static load Cor31500 kN
Grease-lubricated speed120 rpm
Oil-lubricated speed160 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1456 mm
Abutment dimension da1104 mm
Minimum chamfer r129.5 mm
Factor Y03.2
Factor Y13.3
Factor Y24.9
Factor e0.21
Maximum fillet ra8 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 230/1060CAF3/W33?

The 230/1060CAF3/W33 catalogue lists da min = 1104 mm; Da max = 1456 mm; ra max = 8 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 230/1060CAF3/W33?

The listed values for 230/1060CAF3/W33 are grease: 120 rpm; oil: 160 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 230/1060CAF3/W33?

The catalogue reference mass for 230/1060CAF3/W33 is 1790 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 1060 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
N28/1060Cylindrical Roller Bearing1060 × 1280 × 128 mm
NU38/1060Cylindrical Roller Bearing1060 × 1280 × 165 mm

Compare alternative series sharing the same 1060 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 230/1060CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top