230 SERIES · SPHERICAL ROLLER BEARING

230/1120CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

230/1120CAF3/W33 spherical roller bearing: 1120 mm bore (d), 1580 mm outside diameter (D), 345 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1120 mmD 1580 mmB 345 mmCr 15400 kNMass 2120 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1120D 1580B 345

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1120 mm
Outside diameter D1580 mm
Width B345 mm
Mass2120 kg
Catalogue dynamic load Cr15400 kN
Catalogue static load Cor38000 kN
Grease-lubricated speed110 rpm
Oil-lubricated speed140 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1505 mm
Abutment dimension da1211 mm
Minimum chamfer r129.5 mm
Factor Y03.3
Factor Y13.4
Factor Y25
Factor e0.2
Maximum fillet ra8 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 230/1120CAF3/W33?

The 230/1120CAF3/W33 catalogue lists da min = 1211 mm; Da max = 1505 mm; ra max = 8 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 230/1120CAF3/W33?

The listed values for 230/1120CAF3/W33 are grease: 110 rpm; oil: 140 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 230/1120CAF3/W33?

The catalogue reference mass for 230/1120CAF3/W33 is 2120 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 1120 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
238/1120CAF3/W33Spherical Roller Bearing1120 × 1360 × 180 mm
248/1120CAF3/W33Spherical Roller Bearing1120 × 1360 × 243 mm
249/1120CAF1D/W33Spherical Roller Bearing1120 × 1460 × 500 mm
249/1120CAF3/W33Spherical Roller Bearing1120 × 1460 × 335 mm
239/1120CAF3/W33Spherical Roller Bearing1120 × 1460 × 250 mm
240/1120CAF3/W33Spherical Roller Bearing1120 × 1580 × 462 mm

Compare alternative series sharing the same 1120 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 230/1120CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top