239 SERIES · SPHERICAL ROLLER BEARING
239/1060CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
239/1060CAF3/W33 spherical roller bearing: 1060 mm bore (d), 1400 mm outside diameter (D), 250 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 1060 mm |
|---|---|
| Outside diameter D | 1400 mm |
| Width B | 250 mm |
| Mass | 1030 kg |
| Catalogue dynamic load Cr | 9300 kN |
| Catalogue static load Cor | 24400 kN |
| Grease-lubricated speed | 130 rpm |
| Oil-lubricated speed | 170 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 1364 mm |
|---|---|
| Abutment dimension da | 1096 mm |
| Minimum chamfer r12 | 7.5 mm |
| Factor Y0 | 4 |
| Factor Y1 | 4.1 |
| Factor Y2 | 6.1 |
| Factor e | 0.16 |
| Maximum fillet ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 239/1060CAF3/W33?
The 239/1060CAF3/W33 catalogue lists da min = 1096 mm; Da max = 1364 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 239/1060CAF3/W33?
The listed values for 239/1060CAF3/W33 are grease: 130 rpm; oil: 170 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 239/1060CAF3/W33?
The catalogue reference mass for 239/1060CAF3/W33 is 1030 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 230/1060X3CAF1D/W33 | Spherical Roller Bearing | 1060 × 1460 × 500 mm |
| N28/1060 | Cylindrical Roller Bearing | 1060 × 1280 × 128 mm |
| NU38/1060 | Cylindrical Roller Bearing | 1060 × 1280 × 165 mm |
Compare alternative series sharing the same 1060 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
- CA vs CC vs MB vs E Cages in Spherical Roller Bearings: Vibration, Speed & QC
- Tapered Bore Bearings: 1:12 (K) vs 1:30 (K30), Adapter and Withdrawal Sleeves
- Spherical Roller Bearing Series Selection: 239 vs 230 vs 240 vs 231 vs 232 vs 222/223
- 239 Series Spherical Roller Bearings
- Tapered Bore Clearance Calculator
DIRECT FACTORY SOURCING
Request a Quote for 239/1060CAF3/W33
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

