ZQM BEARINGS · PRODUCT SERIES

239 Series Spherical Roller Bearings

This page covers catalogue dimensions and available specifications for 239 series spherical roller bearings. Designed with the lowest radial section height among ISO spherical roller series, the 239 series supports very large shaft diameters where housing radial space is strictly constrained.

239 series spherical roller bearing representative image
239 series representative image · For structural reference
48 ModelsCatalogue Rows Listed
150–1500 mmBore Diameter (d)
Straight / 1:12 KBore / Design Feature
ISO 15Boundary Standard
SPECIFICATIONS

239 Series Dimensions & Technical Specifications

Select a complete model designation to view all available catalogue specifications. Dimensions in mm; load ratings in kN; mass in kg.

239 Series Structural Cross-Section Reference

Standard tapered bore for this series is 1:12 (suffix K) — distinct from the 1:30 taper (K30) used on 240/241 wide series.

W33Spherical Roller · Cylindrical BoredDB
Cylindrical Bore (CA / CC / MB / E + W33)Mounted directly on cylindrical shafts; outer ring W33 groove with three lubrication holes.
W33Spherical Roller · 1:12 Tapered Bore (K)dDB1:12 (K)
1:12 Tapered Bore (Suffix K · ISO 15 Small-End d)Pairs with H/HE/HA adapter sleeves or AH withdrawal sleeves for rapid mounting and clearance setting.

239 Series Master Size Chart

Source: ZQM Master PDF Catalogue (wp_zqm_models_v1) · ISO 15
Swipe horizontally to view full columns
Modeld / mmD / mmB / mmCr / kNCor / kNkg
23930CA/W33150210453346224.97
23932CA/W33160220453606754.97
23934BCA/W33170230453506605.38
23936CA/W33180250524708907.64
23938CA/W33190260524608758.03
23940CA/W3320028060570106011
23944CA/W3322030060625124012.2
23948CA/W3324032060635130013.3
23952CA/W3326036075930187023
23952X2CA/W3326036070805159021.6
23956CA/W3328038075925195024.5
23960CA/W33300420901230249038.2
23964CA/W33320440901300275040.6
23968CA/W33340460901330284042.4
23972CA/W33360480901390305044.7
23976CA/W333805201061870410065.4
23980CA/W334005401061890425069.1
23984CA/W334205601061870425071.6
23988CAF3/W334406001182190480096.3
23992CAF3/W3346062011822204950100
23996CAF3/W3348065012825805850121
239/500CAF3/W3350067012824605550124
239/530CAF3/W3353071013629306800149
239/560CA/W3356075014031007250172
239/600CAF3/W3360080015034508100205
239/630CAF3/W3363085016540009350259
239/630X2CAF3/W3363085014534507950227
239/670CA/W33670900170435010300300
239/670X1CAF3/W670920170435010300343
239/710CAF1D/W33X71095033037509900581
239/710CAF3/W33710950180480011700352
239/750CAF3/W337501000185525012800398
239/750X2CAF3/W337501000200525012800433
239/800CAF3/W338001060195560013700462
239/850CAF3/W338501120200610015200523
239/850X3CAF1D/W338501180331644017000880
239/900CAF3/W339001180206660016700591
239/950CAF3/W339501250224760019900732
239/1000CAF3/W3310001320236820021700881
239/1000X2CAF3/W3310001320258850022600911
239/1060CAF3/W33106014002509300244001030
239/1120CAF3/W33112014602509500260001100
239/1180CAF3/W331180154027210545294501400
239/1250CAF3/W331250163028011600315001540
239/1320CAF3/W331320172030013600380001900
239/1320X2CAF3/W331320172035013500385002100
239/1400CAF3/W331400182031514300405002140
239/1500CAF3/W331500195033516000475002800

A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.

Bore taper & sourcing notes: Tapered-bore 239 series bearings use a 1:12 taper (suffix K). Because large-bore 239 series units frequently involve machined cages (CA/CAF3/W33), special heat stabilization, or custom lifting/inspection requirements, always share your complete designation or drawing when requesting lead time.

Related resources & featured models: View 23980 CA/W33, compare 230 Series and 240 Series, read our ISO Cross-Reference Guide, or request a quotation from ZQM Bearings.

SERIES FAQ

239 Series Selection & Supply FAQ

How many 239 series bearing models are listed, and what bore sizes are covered?

This table lists 48 verified 239 series designations from the ZQM General Catalogue spanning bore diameters from 150 mm to 1500 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).

What bore taper (K 1:12 vs K30) and clearance options apply to the 239 series?

Standard 239 series spherical roller bearings use cylindrical bore or 1:12 tapered bore (suffix K, compatible with standard H-series adapter sleeves where applicable; 1:30 K30 applies only to 240/241 series). Always verify radial clearance (CN, C3, C4) and cage design against the catalog or drawing.

Are 239 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?

Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.

How do I request a factory quote or CAD drawing for 239 series bearings?

Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.

FROM SPECIFICATION TO SUPPLY

Request a Quotation for 239 Series Bearings

One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

1. Complete DesignationInclude full cage, lube & bore suffixes (CA/W33, EM, K/K30)
2. Bore & ClearanceSpecify straight vs. 1:12 K / 1:30 K30 and CN / C3 / C4
3. Operating ConditionsShare machine position, speed, load & QC documentation
4. Quantity & PackingConfirm trial lot or OEM volume, export crate & destination
Scroll to Top