239 SERIES · SPHERICAL ROLLER BEARING
239/670X1CAF3/W Spherical Roller Bearing Dimensions & Specifications
239/670X1CAF3/W spherical roller bearing: 670 mm bore (d), 920 mm outside diameter (D), 170 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 670 mm |
|---|---|
| Outside diameter D | 920 mm |
| Width B | 170 mm |
| Mass | 343 kg |
| Catalogue dynamic load Cr | 4350 kN |
| Catalogue static load Cor | 10300 kN |
| Grease-lubricated speed | 260 rpm |
| Oil-lubricated speed | 340 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 874 mm |
|---|---|
| Abutment dimension da | 726 mm |
| Minimum chamfer r12 | 6 mm |
| Factor Y0 | 3.8 |
| Factor Y1 | 3.9 |
| Factor Y2 | 5.8 |
| Factor e | 0.17 |
| Maximum fillet ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 239/670X1CAF3/W?
The 239/670X1CAF3/W catalogue lists da min = 726 mm; Da max = 874 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 239/670X1CAF3/W?
The listed values for 239/670X1CAF3/W are grease: 260 rpm; oil: 340 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 239/670X1CAF3/W?
The catalogue reference mass for 239/670X1CAF3/W is 343 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 249/670CAF3/W33 | Spherical Roller Bearing | 670 × 900 × 230 mm |
| 240/670CAF1D/W33 | Spherical Roller Bearing | 670 × 980 × 350 mm |
| 240/670CAF3/W33 | Spherical Roller Bearing | 670 × 980 × 308 mm |
| 230/670CAF3/W33 | Spherical Roller Bearing | 670 × 980 × 230 mm |
| 241/670CAF3/W33 | Spherical Roller Bearing | 670 × 1090 × 412 mm |
| 231/670CAF3/W33 | Spherical Roller Bearing | 670 × 1090 × 336 mm |
Compare alternative series sharing the same 670 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
- CA vs CC vs MB vs E Cages in Spherical Roller Bearings: Vibration, Speed & QC
- Tapered Bore Bearings: 1:12 (K) vs 1:30 (K30), Adapter and Withdrawal Sleeves
- Spherical Roller Bearing Series Selection: 239 vs 230 vs 240 vs 231 vs 232 vs 222/223
- 239 Series Spherical Roller Bearings
- Tapered Bore Clearance Calculator
DIRECT FACTORY SOURCING
Request a Quote for 239/670X1CAF3/W
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

