239 SERIES · SPHERICAL ROLLER BEARING

239/750X2CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

239/750X2CAF3/W33 spherical roller bearing: 750 mm bore (d), 1000 mm outside diameter (D), 200 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 750 mmD 1000 mmB 200 mmCr 5250 kNMass 433 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 750D 1000B 200

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d750 mm
Outside diameter D1000 mm
Width B200 mm
Mass433 kg
Catalogue dynamic load Cr5250 kN
Catalogue static load Cor12800 kN
Grease-lubricated speed220 rpm
Oil-lubricated speed280 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da952 mm
Abutment dimension da810 mm
Minimum chamfer r126 mm
Factor Y04
Factor Y14.1
Factor Y26
Factor e0.17
Maximum fillet ra5 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 239/750X2CAF3/W33?

The 239/750X2CAF3/W33 catalogue lists da min = 810 mm; Da max = 952 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 239/750X2CAF3/W33?

The listed values for 239/750X2CAF3/W33 are grease: 220 rpm; oil: 280 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 239/750X2CAF3/W33?

The catalogue reference mass for 239/750X2CAF3/W33 is 433 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 750 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
238/750CAF3/W33Spherical Roller Bearing750 × 920 × 128 mm
249/750CAF1D/W33Spherical Roller Bearing750 × 1000 × 360 mm
249/750CAF3/W33Spherical Roller Bearing750 × 1000 × 250 mm
240/750CAF1D/W33Spherical Roller Bearing750 × 1090 × 475 mm
240/750CAF3/W33Spherical Roller Bearing750 × 1090 × 335 mm
230/750CAF3/W33Spherical Roller Bearing750 × 1090 × 250 mm

Compare alternative series sharing the same 750 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 239/750X2CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top