249 SERIES · SPHERICAL ROLLER BEARING
249/1060CAF1D/W33 Spherical Roller Bearing Dimensions & Specifications
249/1060CAF1D/W33 spherical roller bearing: 1060.4 mm bore (d), 1400 mm outside diameter (D), 490 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 1060.4 mm |
|---|---|
| Outside diameter D | 1400 mm |
| Width B | 490 mm |
| Outer-ring width C | 335 mm |
| Mass | 1870 kg |
| Catalogue dynamic load Cr | 11300 kN |
| Catalogue static load Cor | 32000 kN |
Mounting dimensions & additional parameters (8)
| Minimum chamfer r12 | 7.5 mm |
|---|---|
| Minimum chamfer r34 | 7.5 mm |
| Diameter D1 | 1285 mm |
| Diameter d1 | 1253 mm |
| Factor Y0 | 3.2 |
| Factor Y1 | 3.2 |
| Factor Y2 | 4.8 |
| Factor e | 0.21 |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
What is the reference mass of 249/1060CAF1D/W33?
The catalogue reference mass for 249/1060CAF1D/W33 is 1870 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of 249/1060CAF1D/W33?
In the ZQM General Catalogue, 249/1060CAF1D/W33 has nominal boundary dimensions of Array. Catalog load ratings: Cr 11300 kN, C0r 32000 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
DIRECT FACTORY SOURCING
Request a Quote for 249/1060CAF1D/W33
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

