Deep groove ball bearings
60/560F1 Deep Groove Ball Bearing Dimensions & Specifications
60/560F1 deep groove ball bearing: 560 mm bore (d), 820 mm outside diameter (D), 115 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 560 mm |
|---|---|
| Outside diameter D | 820 mm |
| Width B | 115 mm |
| Mass | 210 kg |
| Catalogue dynamic load Cr | 663 kN |
| Catalogue static load Cor | 1470 kN |
| Grease-lubricated speed grease | 630 rpm |
| Oil-lubricated speed oil | 750 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 794 mm |
|---|---|
| Abutment dimension da da | 586 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/560F1?
The 60/560F1 catalogue lists da = 586 mm; Da = 794 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/560F1?
The listed values for 60/560F1 are grease: 630 rpm; oil: 750 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/560F1?
The catalogue reference mass for 60/560F1 is 210 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.