Deep groove ball bearings
60/530F1 Deep Groove Ball Bearing Dimensions & Specifications
60/530F1 deep groove ball bearing: 530 mm bore (d), 780 mm outside diameter (D), 112 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 530 mm |
|---|---|
| Outside diameter D | 780 mm |
| Width B | 112 mm |
| Mass | 184 kg |
| Catalogue dynamic load Cr | 680 kN |
| Catalogue static load Cor | 1300 kN |
| Grease-lubricated speed grease | 670 rpm |
| Oil-lubricated speed oil | 800 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 738 mm |
|---|---|
| Abutment dimension da da | 579 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/530F1?
The 60/530F1 catalogue lists da = 579 mm; Da = 738 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/530F1?
The listed values for 60/530F1 are grease: 670 rpm; oil: 800 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/530F1?
The catalogue reference mass for 60/530F1 is 184 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.