Deep groove ball bearings
60/630F1 Deep Groove Ball Bearing Dimensions & Specifications
60/630F1 deep groove ball bearing: 630 mm bore (d), 920 mm outside diameter (D), 128 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 630 mm |
|---|---|
| Outside diameter D | 920 mm |
| Width B | 128 mm |
| Mass | 285 kg |
| Catalogue dynamic load Cr | 750 kN |
| Catalogue static load Cor | 1620 kN |
| Grease-lubricated speed grease | 560 rpm |
| Oil-lubricated speed oil | 670 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 870 mm |
|---|---|
| Abutment dimension da da | 689 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/630F1?
The 60/630F1 catalogue lists da = 689 mm; Da = 870 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/630F1?
The listed values for 60/630F1 are grease: 560 rpm; oil: 670 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/630F1?
The catalogue reference mass for 60/630F1 is 285 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.