Deep groove ball bearings
60/670F1 Deep Groove Ball Bearing Dimensions & Specifications
60/670F1 deep groove ball bearing: 670 mm bore (d), 980 mm outside diameter (D), 136 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 670 mm |
|---|---|
| Outside diameter D | 980 mm |
| Width B | 136 mm |
| Mass | 351 kg |
| Catalogue dynamic load Cr | 765 kN |
| Catalogue static load Cor | 1730 kN |
| Grease-lubricated speed grease | 500 rpm |
| Oil-lubricated speed oil | 600 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 929 mm |
|---|---|
| Abutment dimension da da | 731 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 17 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/670F1?
The 60/670F1 catalogue lists da = 731 mm; Da = 929 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/670F1?
The listed values for 60/670F1 are grease: 500 rpm; oil: 600 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/670F1?
The catalogue reference mass for 60/670F1 is 351 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.