Deep groove ball bearings
60/600F1 Deep Groove Ball Bearing Dimensions & Specifications
60/600F1 deep groove ball bearing: 600 mm bore (d), 870 mm outside diameter (D), 118 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 600 mm |
|---|---|
| Outside diameter D | 870 mm |
| Width B | 118 mm |
| Mass | 236 kg |
| Catalogue dynamic load Cr | 790 kN |
| Catalogue static load Cor | 1640 kN |
| Grease-lubricated speed grease | 600 rpm |
| Oil-lubricated speed oil | 700 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 827 mm |
|---|---|
| Abutment dimension da da | 652 mm |
| Minimum chamfer r12 r12 | 6.0 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 5 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/600F1?
The 60/600F1 catalogue lists da = 652 mm; Da = 827 mm; ra ≤ 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/600F1?
The listed values for 60/600F1 are grease: 600 rpm; oil: 700 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/600F1?
The catalogue reference mass for 60/600F1 is 236 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.