Deep groove ball bearings
60/710F1 Deep Groove Ball Bearing Dimensions & Specifications
60/710F1 deep groove ball bearing: 710 mm bore (d), 1030 mm outside diameter (D), 140 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Technical specifications
| Bore d | 710 mm |
|---|---|
| Outside diameter D | 1030 mm |
| Width B | 140 mm |
| Mass | 386 kg |
| Catalogue dynamic load Cr | 1020 kN |
| Catalogue static load Cor | 2310 kN |
| Grease-lubricated speed grease | 480 rpm |
| Oil-lubricated speed oil | 560 rpm |
Mounting dimensions & additional parameters (5)
| Abutment dimension Da Da | 978 mm |
|---|---|
| Abutment dimension da da | 772 mm |
| Minimum chamfer r12 r12 | 7.5 mm |
| Factor f0 f0 | 16 |
| Maximum fillet ra ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 60/710F1?
The 60/710F1 catalogue lists da = 772 mm; Da = 978 mm; ra ≤ 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 60/710F1?
The listed values for 60/710F1 are grease: 480 rpm; oil: 560 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 60/710F1?
The catalogue reference mass for 60/710F1 is 386 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.