LM27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

LM274449D/LM274410/LM274410D Four-Row Tapered Roller Bearing Dimensions & Specifications

LM274449D/LM274410/LM274410D four-row tapered roller bearing: 514.35 mm bore (d), 673.1 mm outside diameter (D), 422.275 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 514.35 mmD 673.1 mmT 422.275 mmMass 401 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 514.35D 673.1T 422.275

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d514.35 mm
Outside diameter D673.1 mm
Overall width T422.275 mm
Mass401 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y01.98
Factor Y12.03
Factor Y23.02
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of LM274449D/LM274410/LM274410D?

The catalogue reference mass for LM274449D/LM274410/LM274410D is 401 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of LM274449D/LM274410/LM274410D?

In the ZQM General Catalogue, LM274449D/LM274410/LM274410D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on LM274449D/LM274410/LM274410D four-row tapered roller bearing?

LM274449D/LM274410/LM274410D (514.35 × 673.1 × 422.275 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for LM274449D/LM274410/LM274410D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top