LM27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

LM275349D/LM275310/LM275310D Four-Row Tapered Roller Bearing Dimensions & Specifications

LM275349D/LM275310/LM275310D four-row tapered roller bearing: 520.7 mm bore (d), 711.2 mm outside diameter (D), 400.05 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 520.7 mmD 711.2 mmT 400.05 mmMass 438 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 520.7D 711.2T 400.05

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d520.7 mm
Outside diameter D711.2 mm
Overall width T400.05 mm
Mass438 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y01.98
Factor Y12.03
Factor Y23.02
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of LM275349D/LM275310/LM275310D?

The catalogue reference mass for LM275349D/LM275310/LM275310D is 438 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of LM275349D/LM275310/LM275310D?

In the ZQM General Catalogue, LM275349D/LM275310/LM275310D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on LM275349D/LM275310/LM275310D four-row tapered roller bearing?

LM275349D/LM275310/LM275310D (520.7 × 711.2 × 400.05 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for LM275349D/LM275310/LM275310D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top