M27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

M270749DA/M270410/M270410D Four-Row Tapered Roller Bearing Dimensions & Specifications

M270749DA/M270410/M270410D four-row tapered roller bearing: 450 mm bore (d), 595 mm outside diameter (D), 368 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 450 mmD 595 mmT 368 mmMass 285 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 450D 595T 368

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d450 mm
Outside diameter D595 mm
Overall width T368 mm
Mass285 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.76
Factor Y02
Factor Y12
Factor Y23
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of M270749DA/M270410/M270410D?

The catalogue reference mass for M270749DA/M270410/M270410D is 285 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of M270749DA/M270410/M270410D?

In the ZQM General Catalogue, M270749DA/M270410/M270410D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on M270749DA/M270410/M270410D four-row tapered roller bearing?

M270749DA/M270410/M270410D (450 × 595 × 368 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for M270749DA/M270410/M270410D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top