M27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

M271149D/M271110/271110D Four-Row Tapered Roller Bearing Dimensions & Specifications

M271149D/M271110/271110D four-row tapered roller bearing: 460 mm bore (d), 625 mm outside diameter (D), 421 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 460 mmD 625 mmT 421 mmMass 381 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 460D 625T 421

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d460 mm
Outside diameter D625 mm
Overall width T421 mm
Mass381 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y02.0
Factor Y12
Factor Y23
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of M271149D/M271110/271110D?

The catalogue reference mass for M271149D/M271110/271110D is 381 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of M271149D/M271110/271110D?

In the ZQM General Catalogue, M271149D/M271110/271110D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on M271149D/M271110/271110D four-row tapered roller bearing?

M271149D/M271110/271110D (460 × 625 × 421 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for M271149D/M271110/271110D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top