M27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

M272249DW/M272249W/M272210D Four-Row Tapered Roller Bearing Dimensions & Specifications

M272249DW/M272249W/M272210D four-row tapered roller bearing: 482.6 mm bore (d), 615.95 mm outside diameter (D), 317.5 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 482.6 mmD 615.95 mmT 317.5 mmMass 245 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 482.6D 615.95T 317.5

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d482.6 mm
Outside diameter D615.95 mm
Overall width T317.5 mm
Mass245 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design2
Factor K1.76
Factor Y02
Factor Y12
Factor Y23
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of M272249DW/M272249W/M272210D?

The catalogue reference mass for M272249DW/M272249W/M272210D is 245 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of M272249DW/M272249W/M272210D?

In the ZQM General Catalogue, M272249DW/M272249W/M272210D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on M272249DW/M272249W/M272210D four-row tapered roller bearing?

M272249DW/M272249W/M272210D (482.6 × 615.95 × 317.5 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for M272249DW/M272249W/M272210D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top