M27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

M272749D/M272710/M272710D Four-Row Tapered Roller Bearing Dimensions & Specifications

M272749D/M272710/M272710D four-row tapered roller bearing: 479.425 mm bore (d), 679.45 mm outside diameter (D), 495.3 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 479.425 mmD 679.45 mmT 495.3 mmMass 566 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 479.425D 679.45T 495.3

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d479.425 mm
Outside diameter D679.45 mm
Overall width T495.3 mm
Mass566 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y01.98
Factor Y12.03
Factor Y23.02
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of M272749D/M272710/M272710D?

The catalogue reference mass for M272749D/M272710/M272710D is 566 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of M272749D/M272710/M272710D?

In the ZQM General Catalogue, M272749D/M272710/M272710D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on M272749D/M272710/M272710D four-row tapered roller bearing?

M272749D/M272710/M272710D (479.425 × 679.45 × 495.3 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for M272749D/M272710/M272710D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top