M27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

M276449D/M276410/M276410D Four-Row Tapered Roller Bearing Dimensions & Specifications

M276449D/M276410/M276410D four-row tapered roller bearing: 536.575 mm bore (d), 761.873 mm outside diameter (D), 558.8 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 536.575 mmD 761.873 mmT 558.8 mmMass 821 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 536.575D 761.873T 558.8

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d536.575 mm
Outside diameter D761.873 mm
Overall width T558.8 mm
Mass821 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y01.98
Factor Y12.03
Factor Y23.02
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of M276449D/M276410/M276410D?

The catalogue reference mass for M276449D/M276410/M276410D is 821 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of M276449D/M276410/M276410D?

In the ZQM General Catalogue, M276449D/M276410/M276410D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on M276449D/M276410/M276410D four-row tapered roller bearing?

M276449D/M276410/M276410D (536.575 × 761.873 × 558.8 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for M276449D/M276410/M276410D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top