M27 SERIES · FOUR-ROW TAPERED ROLLER BEARING

M278749D/M278710/M278710D Four-Row Tapered Roller Bearing Dimensions & Specifications

M278749D/M278710/M278710D four-row tapered roller bearing: 571.5 mm bore (d), 812.8 mm outside diameter (D), 593.725 mm overall width (T). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 571.5 mmD 812.8 mmT 593.725 mmMass 1030 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Four-Row Tapered Rolling Mill Bearing (TQO)d 571.5D 812.8T 593.725

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d571.5 mm
Outside diameter D812.8 mm
Overall width T593.725 mm
Mass1030 kg
Mounting dimensions & additional parameters (6)
Catalogue design code design1
Factor K1.77
Factor Y01.98
Factor Y12.03
Factor Y23.02
Factor e0.33

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of M278749D/M278710/M278710D?

The catalogue reference mass for M278749D/M278710/M278710D is 1030 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of M278749D/M278710/M278710D?

In the ZQM General Catalogue, M278749D/M278710/M278710D has nominal boundary dimensions of Array. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

How is internal clearance controlled on M278749D/M278710/M278710D four-row tapered roller bearing?

M278749D/M278710/M278710D (571.5 × 812.8 × 593.725 mm) carries combined heavy radial and bidirectional axial roll-neck loads. Internal axial clearance is set by factory-matched inner and outer spacer rings; assemble each matched set by serial marking and never mix components across sets.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for M278749D/M278710/M278710D

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top