2215 Self-Aligning Ball Bearing 75 × 130 × 31 mm

Wide ISO 15 Series 22 2215 self-aligning ball bearing measuring 75 × 130 × 31 mm, suited to aggregate belt-conveyor tail pulleys and screening feeder drives with structural frame flex. Supplied in straight 2215 or 1:12 tapered 2215K with H315 adapter sleeve for 65 mm plain shafting.

The 2215 self-aligning ball bearing (75 × 130 × 31 mm, ISO 15 Dimension Series 22) brings wide double-row misalignment forgiveness to 75 mm aggregate belt-conveyor tail pulleys, take-up drums, and light screening feeder drives. Built for bolted truss frames that settle over gravel yards, it is supplied either with a cylindrical 75 mm bore or as 2215K (1:12 tapered bore) clamping onto 65 mm commercial bar stock using an H315 adapter sleeve.

ISO 15 Dimension Symbol 2215 Value Quarry & Conveyor Notes
Bore Diameter d 75 mm ISO 15 Cylindrical Bore
Outside Diameter D 130 mm Series 22 Envelope
Width B 31 mm Wide 22-Series Support Span
Tapered Mounting Option 2215K 1:12 Tapered Bore Mounts on 65 mm plain shaft via H315 sleeve
Internal Geometry Double-Row Ball Sphered Outer Track Point contact (p = 3); ~2.5° misalignment
Load Ratings & Cage Cr / C0r / Cage Factory Drawing Verified Steel, brass, or polyamide confirmed at quote

2215 Truss-Frame Deflection & Plain-Shaft Mounting Utility

Portable crushing spreads, sand-washing conveyors, and quarry stockpiling booms rest on uneven graded earth rather than precision-leveled mill foundations. Take-up screw adjustments on tail pulleys frequently pull one side of the drum slightly ahead of the other to track the belt, intentionally skewing the shaft axis relative to the side stringers. Under these shifting angles, the 2215’s sphered outer raceway lets the 75 mm tail drum pivot freely without gouging raceway edges.

Field mechanics appreciate the 2215K + H315 pairing because raw 65 mm cold-finished shafting can be cut to length on site without lathe-turning stepped shoulders. Note the important metric sleeve step starting at bore code 15: an H315 sleeve bridges a 75 mm tapered bearing bore down to a 65 mm shaft diameter (a 10 mm step, unlike the 5 mm step on smaller sleeves). Always weigh load severity honestly: 2215 serves tail pulleys, bend pulleys, and moderate-tension conveyors cleanly, whereas high-tension primary head pulleys or vibrating quarry screens enduring heavy shock demand spherical roller bearings (22215 or 22315 series).

2215 Cross-Reference & Quarry Spares Verification

Aggregate plant purchasing teams consolidating split plummer block spares (SNL 515-612 series) regularly match these ISO 15 codes (including legacy Chinese code 1515):

Manufacturer / Standard Cylindrical Bore 1:12 Tapered Bore Field Verification Points
ZQM Bearings 2215 2215K Drawing verifies cage material, ratings & clearance
SKF 2215 ETN9 / 2215 2215 EKTN9 / 2215 K Verify TN9 polyamide vs pressed steel cage
FAG / Schaeffler 2215-TVH / 2215 2215-K-TVH / 2215-K Confirm C3 clearance on adapter-sleeve mounts
NSK / NTN 2215 2215K Check suffix for open vs sealed execution
Legacy GB Code 1515 11515 Older Chinese quarry conveyor blueprints

Dimensional Notice: Equivalency covers ISO 15 boundary sizes (75 × 130 × 31 mm) strictly and is not a blanket direct-interchange warranty. Retainer strength, internal radial clearance, and dynamic capacities differ by maker and must be verified against equipment drawings.

Quarry Dust Sealing & Adapter-Sleeve Drive-Up Control

Crushed limestone fines and silica sand around mining and aggregate handling lines destroy unsealed bearings within weeks. Inside SNL 515 split housings, pack the open 2215 cavity with EP2 grease and fit taconite or labyrinth multi-stage seals so weekly grease purges push grit outward away from the balls.

When tightening an H315 locknut under a 2215K, monitor radial internal clearance carefully—excessive wrench torque expands the inner ring enough to eliminate running clearance and cause rapid overheating. Specify stamped steel or brass cages if solar-baked desert housings or nearby asphalt dryers threaten polyamide’s ~120 °C continuous ceiling.

Requesting 2215 & 2215K Conveyor Bearing Quotations

To quote accurately for quarry fleets or conveyor OEMs, tell us whether you require straight 75 mm 2215 or 1:12 tapered 2215K (with or without H315 sleeve for 65 mm shafts), cage material preference, radial clearance (CN or C3), and order quantity. Formal factory drawings with confirmed load ratings accompany every technical proposal.

Request 2215 Conveyor Specs & Factory Quote

2215 Technical FAQ for Aggregate & Belt Conveyors

Related Selection & Comparison: For heavy quarry head pulleys exceeding ball-bearing shock limits, compare 222/232 Spherical Roller Bearings, review Conveyors & Cranes, or compare 60 mm 2212.

What shaft diameter fits a 2215K with an H315 adapter sleeve?

An H315 metric adapter sleeve adapts the 75 mm tapered bore of a 2215K onto a 65 mm diameter plain shaft—note the 10 mm reduction standard on bore code 15 sleeves.

When should a conveyor pulley switch from 2215 to a 22215 spherical roller bearing?

Use 2215 on moderate-load tail pulleys, snub pulleys, and light feeder drives where misalignment and low drag matter most. Switch to a 22215 SRB on high-tension drive head pulleys, heavy impact loading zones, or vibrating feeders.

Can a 2215K handle screw take-up adjustments that tilt the tail pulley slightly?

Yes—within roughly 2°–2.5° on an open 2215K, the sphered outer raceway accommodates minor belt-tracking skew without edge-loading the balls, though extreme pulley cocking should still be corrected mechanically.

Does ZQM verify cage material and clearance before shipping 2215 orders?

Yes. Every 2215 / 2215K quotation includes a confirmed factory drawing detailing cage execution (steel, brass, or polyamide), clearance grade (CN or C3), and verified load ratings.

Scroll to Top