23056 CA/W33 Spherical Roller Bearing Overview
Built for low-section 280 mm industrial journals demanding faster shaft rotation, 23056 CA/W33 achieves a slim 420 mm outer diameter and 106 mm width at just 50.5 kg. It carries 1,540 kN dynamic and 2,950 kN static loads while turning up to 710 rpm on grease or 900 rpm under oil lubrication.
23056CA/W33 Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 280 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 420 mm |
| Boundary Dimensions & Weight | Width (B) | 106 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 50.5 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 1540 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 2950 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 710 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 900 rpm |
| Abutment & Fillet Dimensions | Shaft abutment diameter (da) | 298 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 402 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 4 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 3 mm |
| Calculation Factors | Calculation factor (e) | 0.24 |
| Calculation Factors | Axial load factor (static) (Y0) | 2.7 |
| Calculation Factors | Axial load factor (Y1) | 2.8 |
| Calculation Factors | Axial load factor (Y2) | 4.2 |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Designation Breakdown & 280 mm Bore Selection
Key execution codes for 23056 CA/W33 and engineering comparison across 280 mm bore catalogue alternatives:
| Attribute | Code / Option | Engineering Notes |
|---|---|---|
| CA / W33 Structure | 23056 CA/W33 |
One-piece machined brass cage (CA), symmetrical rollers, annular outer-ring oil groove and 3 lube holes (W33) |
| Radial Clearance | C0 (Normal) / C3 / C4 | C3 recommended for heated journals or sleeve clamping; C4 reserved for vibrating-screen eccentrics |
| Bore Execution | Cylindrical / Tapered (1:12 K) | Straight bore standard; optional 1:12 tapered bore (K) mounts via adapter or withdrawal sleeves |
Compared with heavy 280 mm siblings, 23056 CA/W33 trims 15.9 kg off 24056 (140 mm wide) and 43.8 kg off 23156 (460 mm OD), while running 18%–27% faster than both.
| Catalogue Unit | Envelope & Mass | Ratings & Grease Limit |
|---|---|---|
| 23056CA/W33 (Current) | 280 × 420 × 106 mm · 50.5 kg | Cr 1,540 kN · C0r 2,950 kN · 710 rpm |
| 24056CA/W33 | 280 × 420 × 140 mm · 66.4 kg | Cr 1,880 kN · C0r 3,800 kN · 600 rpm |
| 23156CA/W33 | 280 × 460 × 146 mm · 94.3 kg | Cr 2,230 kN · C0r 4,000 kN · 560 rpm |
| 22256CA/W33 | 280 × 500 × 130 mm · 110 kg | Cr 2,280 kN · C0r 3,650 kN · 630 rpm |
Brand Cross-Reference & Interchangeability
Manufacturer designations sharing the 280 × 420 × 106 mm nominal ISO boundary envelope (full product catalog):
| Manufacturer | Reference Code | Verification Scope |
|---|---|---|
| ZQM Bearings | 23056 CA/W33 |
Machined brass CA cage & W33 lube groove per ISO 15 envelope |
| SKF | 23056 CC/W33 | Explorer series reference; confirm stamped steel vs brass cage |
| FAG / Schaeffler | 23056-E1-XL-MB1 | E1/X-life spherical series with MB1 brass cage |
| NSK | 23056CAME4 | EA / CAME4 high-capacity brass-cage execution |
| NTN / Timken | 23056EMD1 / 23056EJW33 | Heavy-duty industrial spherical series peer |
Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (280 × 420 × 106 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.
Industrial Applications & Mounting Guidance (280 mm Shaft Class)
Primary machinery roles and field mounting practices matched to this 280 × 420 × 106 mm assembly:
| Target Machinery | Operating Duty Profile | Mounting & Lubrication Practice |
|---|---|---|
| Pulp & Paper Drying Cylinder Journals | High-speed web tension up to 900 rpm oil flow with axial steam expansion | Pair locating and non-locating housings; specify C3 or C4 clearance on steam-heated rolls |
| Industrial Centrifugal Blowers & ID Fans | Moderate radial rotor forces at elevated tip velocities | Maintain clean grease replenishment intervals via W33 ports and balance rotor assemblies |
| Medium Helical Reduction Gearboxes | Compact center-distance shafts with bidirectional helical thrust | Verify factor e = 0.24 and axial factor Y2 = 4.2 against gear tooth thrust loads |
For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.
Pre-Order Engineering Checklist
Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 280 × 420 × 106 mm model:
| Checkpoint | Parameters to Confirm | Engineering Purpose |
|---|---|---|
| 1. Code & Clearance | Specify 23056 CA/W33, C0/C3/C4 play, and 1:12 K bore |
Aligns mounted internal play with shaft interference and running ΔT |
| 2. Shoulder & Fit Limits | Verify da 298 mm, Da 402 mm, r1,2 min 4 mm, ra max 3 mm | Prevents chamfer interference and inner-ring creep |
| 3. Quantity & QC Scope | Unit mass 50.5 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs | Confirms pallet crating, MOQ lead time, and inspection records |
Frequently Asked Questions
What are the exact size and mass of 23056 CA/W33?
ZQM catalogue records specify 280 mm bore, 420 mm outside diameter, 106 mm width, and 50.5 kg mass.
Why choose 23056 over 24056 or 23156 for 280 mm shafting?
Its narrow 420 × 106 mm section trims bearing reference mass by 43.8 kg versus 23156 and pushes grease speed to 710 rpm (oil 900 rpm) for fans and paper rolls.
What shaft and housing shoulder dimensions are required?
Keep shaft shoulder da min >= 298 mm, housing shoulder Da max <= 402 mm, fillet ra max = 4 mm.
How should thermal clearance and export delivery be confirmed for 280 mm orders?
Steam-heated paper cylinders and high-speed fans often expand the inner ring faster than the housing, making C3/C4 clearance essential. Contact ZQM to confirm MOQ, moisture-barrier crating, and CMM/hardness inspection documentation.





