,

29430 Spherical Roller Thrust Bearing 150 × 300 × 90 mm

Extra-heavy ISO 294-series 29430 spherical roller thrust bearing (150 × 300 × 90 mm, 27.9 kg) delivering 1,580 kN dynamic and 4,900 kN static axial shock capacity for cement VRM grinding tables and quarry cone crushers.

Request a Quote

Beneath a cement vertical roller mill (VRM) grinding table or inside a hard-rock quarry cone crusher thrust step, uncrushable steel tramp and erratic limestone clinker beds unleash multi-thousand-kilonewton downward shock waves. Weighing 27.9 kg across a heavy 150 × 300 × 90 mm envelope, the ZQM 29430 spherical roller thrust bearing stands up to extreme mineral comminution with 1,580 kN basic dynamic capacity (Ca), an extraordinary 4,900 kN static axial load rating (C0a), and 1,100 rpm oil speed limit (800 rpm grease).

29430 Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 29430
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)150 mm
Boundary Dimensions & WeightOutside diameter (D)300 mm
Boundary Dimensions & WeightOverall height (H)90 mm
Boundary Dimensions & WeightInner-ring width (B)58 mm
Boundary Dimensions & WeightOuter-ring width (C)44 mm
Boundary Dimensions & WeightInner-ring rib / raceway diameter (d1)266 mm
Boundary Dimensions & WeightOuter-ring rib / raceway diameter (D1)206 mm
Boundary Dimensions & WeightReference mass (Weight)27.9 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Ca)1580 kN
Load Ratings & Limiting SpeedsBasic static load rating (Coa)4900 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)800 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)1100 rpm
Abutment & Fillet DimensionsShaft abutment diameter (da)220 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)250 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)4 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)3 mm
Abutment & Fillet DimensionsAxial offset (S)92 mm

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

4,900 kN Shock Architecture Inside the 29430 Thrust Assembly

Crushing and raw-meal grinding demand thick structural steel sections, self-aligning resilience, and contamination-tolerant oil lubrication:

  • Massive Static Overload Shield: At 4,900 kN C0a, the 29430 absorbs abrupt hydraulic-release pressure spikes when quarry tramp iron enters a cone crusher chamber—preventing instant raceway denting that ends lighter bearing lives prematurely.
  • Heavy Washer Section Thickness: A 58 mm shaft washer (B) and 44 mm housing washer (C) distribute compressive Hertzian stresses evenly into cast-steel gear pedestals without ovalizing under cyclic grinding-roller passes.
  • Pedestal Deflection Immunity at S = 92 mm: Heavy gearbox casings breathe and warp under asymmetric three-roller or four-roller VRM grinding loads; pivoting about sphere center S = 92 mm preserves uniform roller-to-raceway line contact.
  • Combined Eccentric Thrust Capacity: Steep internal contact angles handle eccentric radial forces up to Fr ≤ 0.55 · Fa while keeping crushing heads locked accurately in vertical height.

ISO 104 Heavy-Series Reference Table for 29430

Brand Catalog Designation Bore d OD D Height H Quarry & Cement Duty Notes
ZQM 29430 150 mm 300 mm 90 mm Catalog 294 heavy baseline; cage confirmed per order
SKF 29430 E 150 mm 300 mm 90 mm High-capacity steel cage Explorer design
FAG / Schaeffler 29430-E1 150 mm 300 mm 90 mm X-life crowned roller profile
NSK 29430 / 29430M 150 mm 300 mm 90 mm Machined brass cage severe-shock option
Timken / NTN 29430EM / 29430 150 mm 300 mm 90 mm Mining & cement heavy axial execution

Technical boundary notice: Table entries align solely on the ISO 104 external package (150 × 300 × 90 mm). Roller metallurgy, cage mass, and internal clearance vary across producers; confirm crusher or VRM gearbox oil-port alignment and mounting fits against OEM blueprints before replacement.

VRM & Cone Crusher Forced Oil & Installation Standards

  1. Heavy Pedestal Abutment Backing: Machine shaft shoulders to da ≥ 220 mm (supporting d1 = 266 mm washer OD) and housing seat lips to Da ≤ 250 mm (housing washer bore D1 = 206 mm), limiting fillet radii to ra ≤ 3 mm inside the 4 mm minimum chamfer.
  2. Mandatory Forced Circulating Oil Filtration: Airborne silicate and cement dust destroy rolling surfaces within weeks if allowed into the sump. Supply ISO VG 320–460 EP gear oil via dedicated duplex fine-micron filters and shell-and-tube heat exchangers, backed by positive-pressure air-purged labyrinth seals.
  3. Controlled Induction Heating for 150 mm Interference Fits: Never hammer the 27.9 kg assembly onto its spindle. Heat the shaft washer evenly to 100–110 °C on an induction heater, seat squarely against the 220 mm shoulder, and confirm zero feeler-gauge gap after thermal soak.
  4. Protect Against No-Load Mill Start Skidding: Before feeding clinker onto the VRM table, verify static table dead-weight or hydraulic jacking pressure supplies adequate minimum axial load so the large roller set does not skid during cold start.

Sourcing heavy thrust bearings for a cement plant kiln shutdown or quarry crusher rebuild? Send equipment model, oil-station filtration specs, and target delivery window through our heavy industrial quotation portal.

Cement VRM & Cone Crusher 29430 Engineering FAQ

Related Selection & Comparison: For ultra-large vertical roller mills exceeding 300 mm bore, explore the 420 mm 29384 thrust roller bearing, inspect our Mining & Crushing Bearing Guide, or compare all Thrust Roller Bearings.

Why is 4,900 kN static rating so critical in a quarry cone crusher thrust step?

When uncrushable excavator teeth or rebar enter the crushing cavity, axial load spikes far above steady-state operating tonnage before hydraulic tramp-release cylinders open. A 4,900 kN static rating provides the safety factor needed to survive repeated overload events without raceway brinelling.

What oil filtration level should accompany a 29430 in a dusty cement VRM gearbox?

Cement raw meal is highly abrasive. Maintain continuous forced-oil circulation using ISO VG 320–460 gear oil filtered through high-efficiency duplex elements (targeting clean ISO 4406 particle counts) combined with over-pressure air-purge shaft sealing.

Can the 29430 be mounted with grease in a slow crusher auxiliary shaft?

Only on intermittent, very low-speed shafts well below the 800 rpm grease ceiling where heat generation is negligible. Production VRM tables and cone crushers require circulating oil (rated up to 1,100 rpm) to flush dust, cool the heavy 90 mm section, and lubricate roller-rib contacts.

How should technicians check housing seat flatness before dropping in a 300 mm OD 29430?

Blue-check the machined housing step (Da ≤ 250 mm) for fretting pockets or tilt, and confirm slight radial clearance around the 300 mm housing washer outer edge so spherical self-alignment around S = 92 mm remains completely free.

Scroll to Top