GE40ES-2RS Spherical Plain Bearing 40 × 62 × 28/22 mm

GE40ES-2RS sealed steel-on-steel spherical plain bearing (ISO 12240-1 Series E, 40 × 62 × 28/22 mm) engineered for hydraulic excavator bucket cylinders and skid-steer boom pivots exposed to abrasive clay, silica grit, and violent digging breakout shocks. Full sliding capacities confirmed on factory drawing.

Built to ISO 12240-1 Dimension Series E, the GE40ES-2RS (GE 40 ES-2RS) sealed radial spherical plain bearing pairs a 40 mm hardened pin bore with a 62 mm housing OD, featuring a 28 mm inner-ring width (B) and 22 mm outer-ring width (C). Combining hardened bearing-steel sliding faces treated with phosphate and MoS₂, twin -2RS elastomer lip seals, and relubrication grooves in both rings, it withstands the relentless abrasive mud ingress and violent bucket breakout impacts typical of mini-to-midsize hydraulic excavators and heavy skid-steer loader boom pivots.

GE40ES-2RS ISO 12240-1 Boundary Envelope Summary

Attribute ISO 12240-1 Series E Value Technical Clarification
Part Code GE40ES-2RS Sealed steel-on-steel radial spherical plain bearing
Inner Bore (d) 40 mm Nominal hardened hinge pin diameter
Outer Diameter (D) 62 mm Nominal boom / cylinder eye bore
Inner Ring Width (B) 28 mm Spherical inner ball axial span
Outer Ring Width (C) 22 mm Single-fractured outer ring seating width
Contact Surface Hardened steel-on-steel Phosphate + MoS₂ surface finish; periodic EP grease replenishment required
Contamination Defense -2RS double-lip seals Integral seals both sides + annular oil groove & holes on inner/outer rings
Load Ratings, Clearance & Tilt Factory drawing confirmed Exact dynamic/static sliding load ratings, radial clearance & tilt angle issued with quote

Shock-Load Sliding Regime (p·v) & 90° Fracture Orientation

During rocky trenching or prying buried stumps, excavator bucket cylinder rods deliver sharp alternating compressive and tensile shock peaks while moving slowly through wide angular arcs. Because the GE40ES-2RS operates through pure surface sliding rather than rolling elements, wear durability depends on keeping the specific contact pressure × sliding velocity (p·v) product lubricated with molybdenum-disulfide-fortified EP grease—never via rolling-bearing fatigue formulas.

Its enveloping outer ring incorporates a single radial fracture created during precision manufacturing to admit the solid inner sphere. Earthmoving mechanics rebuilding a bucket-curl cylinder or loader arm eye must press the outer ring so that this radial fracture sits exactly 90° away from the primary digging/push-pull load axis; aligning the split directly in the digging load zone causes rapid ovalization and premature joint slop.

Excavator Bucket & Skid-Steer Boom Mud-Exclusion Performance

Few industrial joints suffer harsher environmental contamination than lower excavator bucket links submerged in wet clay, crushed quarry fines, and abrasive sand. The dual-sided -2RS contact lip seals grip the ground spherical inner ball across its articulation arc, blocking abrasive quartz particles from turning grease into lapping paste. Meanwhile, the 6 mm width differential between B = 28 mm and C = 22 mm accommodates structural boom twist during uneven side-digging without binding the cylinder piston rod or scoring rod gland seals.

At scheduled shift greasing intervals, pumping fresh EP2 MoS₂ grease into the linkage zerk forces lubricant through the outer-ring annular groove and oil holes across the sliding interface, purging moisture and grit outward past the seal lips. Check our construction and earthmoving supply capabilities on our heavy machinery industry page.

GE40ES-2RS Cross-Reference Equivalents

Maker / Standard Equivalent Code Series E Notes (40 × 62 × 28/22 mm)
ZQM / GB/T 9163 GE40ES-2RS Hardened steel/steel, phosphate & MoS₂ finish, oil grooves/holes, -2RS seals
SKF GE 40 ES-2RS Steel-on-steel radial spherical plain bearing, twin lip seals
INA / Schaeffler GE40-DO-2RS Series E maintenance-required steel/steel (DO) with double lip seals
IKO GE40ES-2RS ISO 12240-1 Series E sealed steel-on-steel spherical plain bearing
Fluro GE 40 ES-2RS Steel/steel relubricatable, -2RS contact seals

Replacement Scope Disclaimer: Equivalence above applies solely to nominal ISO 12240-1 Series E external geometry (40 × 62 × 28/22 mm). Actual seal lip abrasion resistance, clearance group (C2/CN/C3), sliding load capacity, and surface phosphating details vary by brand and are verified on ZQM’s formal quotation drawing prior to volume production.

Sourcing GE40ES-2RS for Earthmoving Attachments & Cylinder Shops

Hydraulic attachment builders, excavator parts distributors, and cylinder repair shops quoting GE40ES-2RS should share expected batch quantity, housing press-fit interference (to select CN vs. C3 radial clearance), and pin surface hardness requirements. ZQM provides verified factory engineering drawings with every formal quote and supports mixed-size Series E pallet consolidations for global aftermarket dealers. Send your cylinder BOM via our direct sales inquiry form.

GE40ES-2RS Earthmoving & Linkage FAQ

Related Selection & Comparison: Compare adjacent hydraulic cylinder sizes GE30ES-2RS (30 mm) and GE50ES-2RS (50 mm), and inspect excavator linkage setups in our Construction Machinery Bearing Hub.

How do the -2RS seals on GE40ES-2RS protect excavator bucket linkages in wet mud?

Double-sided -2RS contact elastomer seals ride smoothly over the hardened spherical inner ball throughout tilt and oscillation, blocking wet clay, sand, and silica grit from entering the steel-on-steel sliding gap while retaining EP grease inside.

What happens if the GE40ES-2RS outer-ring split is accidentally aligned with the cylinder rod axis?

The outer ring’s single radial fracture must always be installed 90° to the primary radial load direction. Placing the fracture in the high-pressure breakout load zone risks spreading the split under shock, pinching the inner ball, and triggering rapid seizing.

Why is grease containing MoS₂ recommended for GE40ES-2RS boom and bucket joints?

Slow, high-pressure oscillating pivots operate in the boundary lubrication regime governed by contact pressure and sliding speed (p·v). Lithium-complex EP grease fortified with solid molybdenum disulfide (MoS₂) cushions metal-to-metal asperities during violent digging shocks.

Can ZQM confirm exact sliding capacities and clearance tolerances before we place a bulk order?

Yes. Dynamic and static sliding load ratings, radial clearance class, permissible misalignment angle, and surface treatment specifications are confirmed on our formal factory drawing during quotation, with sample lots available for cylinder qualification.

Scroll to Top