NJ226EM Cylindrical Roller Bearing 130 × 230 × 40 mm

NJ226EM cylindrical roller bearing: 130 × 230 × 40 mm, machined brass (m), dynamic rating Cr 290 kN, static rating Cor 410 kN, reference mass 7.38 kg. Verify shaft drawings and request bulk factory pricing from ZQM.

Request a Quote

NJ226EM Cylindrical Roller Bearing Overview

Designed with two outer-ring integral ribs and one inner-ring locating flange on a straight cylindrical bore, NJ226EM (130 × 230 × 40 mm, 7.38 kg) locates a 130 mm shaft axially in one direction while sustaining high speed. Reinforced E-series rollers and a machined brass cage deliver Cr = 290 kN, Cor = 410 kN, Fw = 153.5 mm, and speeds up to 2,200 rpm grease / 2,800 rpm oil.

Envelope (d × D × B)130 × 230 × 40 mm
Dynamic / Static RatingCr 290 / C0r 410 kN
Limiting Speed (Grease / Oil)2,200 / 2,800 rpm
Reference Mass · Execution7.38 kg · Machined Brass (M)

NJ226EM Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: NJ226EM
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)130 mm
Boundary Dimensions & WeightOutside diameter (D)230 mm
Boundary Dimensions & WeightWidth (B)40 mm
Boundary Dimensions & WeightRoller set under-raceway diameter (Fw)153.5 mm
Boundary Dimensions & WeightReference mass (Weight)7.38 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)290 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)410 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)2200 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)2800 rpm
Abutment & Fillet DimensionsShaft abutment reference diameter (db)146 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)212 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)3 mm
Abutment & Fillet DimensionsMinimum flange chamfer (r34)3 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)2.5 mm
Abutment & Fillet DimensionsMaximum flange fillet radius (rb)2.5 mm

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Designation Breakdown & 130 mm Bore Selection

Key execution codes for NJ226EM and engineering comparison across 130 mm bore catalogue alternatives:

Attribute Code / Option Engineering Notes
NJ / NU & EM Execution NJ226EM Outer ring 2 ribs, inner ring 1 rib (single-direction axial locating); reinforced E rollers; machined brass cage (M); straight cylindrical bore
Internal Clearance C0 (Normal) / C3 Select C3 radial clearance when heavy shaft interference fits or 2,200+ rpm heat reduce operating play
Under-Roller Envelope Fw = 153.5 mm Straight-bore inner raceway allows separable mounting; Ew and Db/da: Contact us for specifications

Sharing the 130 × 230 × 40 mm envelope with floating NU226EM (Cr 345 kN), this single-ribbed unit adds one-direction axial shaft positioning; stepping up to NJ326EM (280 × 58 mm) raises Cr to 615 kN.

Catalogue Unit Envelope & Mass Ratings & Grease Limit
NJ226EM (Current) 130 × 230 × 40 mm · 7.38 kg Cr 290 kN · C0r 410 kN · 2,200 rpm
NU226EM 130 × 230 × 40 mm · 7.90 kg Cr 345 kN · C0r 425 kN · 2,200 rpm
NJ326EM 130 × 280 × 58 mm · 19.5 kg Cr 615 kN · C0r 735 kN · 1,800 rpm
NJ2326EM 130 × 280 × 93 mm · 28.9 kg Cr 920 kN · C0r 1,230 kN · 1,800 rpm

Brand Cross-Reference & Interchangeability

Manufacturer designations sharing the 130 × 230 × 40 mm nominal ISO boundary envelope (full product catalog):

Manufacturer Reference Code Verification Scope
ZQM Bearings NJ226EM Machined brass cage cylindrical unit per ISO 15 boundary dimensions
SKF NJ 226 ECM Reinforced cylindrical design with machined brass cage
FAG / Schaeffler NJ226-E-XL-M1 X-life cylindrical series with M1 solid brass cage
NSK NJ226EM High-capacity cylindrical series with brass cage
NTN NJ226EG1 Machined brass cage industrial execution

Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (130 × 230 × 40 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.

Industrial Applications & Mounting Guidance (130 mm Shaft Class)

Primary machinery roles and field mounting practices matched to this 130 × 230 × 40 mm assembly:

Target Machinery Operating Duty Profile Mounting & Lubrication Practice
Medium AC Electric Motor Drive Ends Radial belt or coupling forces up to 2,800 rpm oil / 2,200 rpm grease Separable straight-bore inner ring presses cleanly onto motor shafts before stator insertion
Industrial Centrifugal Pump and Compressor Shafts High radial stiffness with controlled single-direction impeller thrust Pair with an opposite-facing NJ unit or NU226EM floating support on the non-drive end
Medium Helical Gearbox Intermediate Spindles Rapid gear-mesh vibration in tight 40 mm axial width One-piece machined brass M cage prevents pocket fatigue under cyclic speed reversals

For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.

Pre-Order Engineering Checklist

Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 130 × 230 × 40 mm model:

Checkpoint Parameters to Confirm Engineering Purpose
1. Code & Clearance Specify NJ226EM, C0/C3/C4 play, and straight bore Aligns mounted internal play with shaft interference and running ΔT
2. Shoulder & Fit Limits Verify db 146 mm, Da 212 mm, ra 2.5 mm; Db/da: Contact us for specifications Prevents chamfer interference and inner-ring creep
3. Quantity & QC Scope Unit mass 7.38 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs Confirms pallet crating, MOQ lead time, and inspection records

Ready for drawing review, clearance matching, or factory bulk quotation on this 130 mm shaft unit?

Request Technical Quote

Frequently Asked Questions

What are the dimensions and mass of NJ226EM?

Catalogue specs list 130 mm straight cylindrical bore, 230 mm outside diameter, 40 mm width, under-roller diameter Fw = 153.5 mm, and 7.38 kg mass.

How does this single-rib unit differ from NU226EM?

It has one inner-ring rib to locate the shaft axially in a single direction, whereas NU226EM has a ribless inner ring for pure axial float. Contact us for specifications on unquoted Db, da, or Ew values.

Which shoulder and fillet limits are published for this 130 mm model?

Published limits are db min = 146 mm, Da max = 212 mm, chamfer r1,2/r3,4 min = 3 mm, and fillet ra/rb max = 2.5 mm; Contact us for specifications regarding Db and da shaft step clearances.

When should C3 clearance and CMM inspection be requested for 130 mm motor shafts?

Medium 130 mm motor and pump shafts running near 2,200–2,800 rpm under heavy press fits typically require C3 radial clearance to preserve oil-film thickness. Confirm MOQ, export lead time, and CMM/hardness/UT inspection sheets with ZQM.

Scroll to Top