NJ228EM Single-Row Cylindrical Roller Bearing Overview
Engineered with two integral outer-ring ribs and a single-rib separable inner ring on a straight cylindrical bore, NJ228EM (NJ 228 EM, 140 × 250 × 42 mm, roller under-diameter Fw = 169 mm, mass 9.43 kg) supports heavy radial loads while locating a 140 mm shaft axially in one direction. Verified in ZQM Bearings’ online factory catalogue, it delivers Cr = 395 kN dynamic capacity, C0r = 515 kN static capacity, and limiting speeds of 2,400 rpm (grease) / 3,000 rpm (oil).
NJ228EM Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 140 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 250 mm |
| Boundary Dimensions & Weight | Width (B) | 42 mm |
| Boundary Dimensions & Weight | Roller set under-raceway diameter (Fw) | 169 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 9.43 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 395 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 515 kN |
| Load Ratings & Limiting Speeds | Limiting speed (grease) | 2400 rpm |
| Load Ratings & Limiting Speeds | Limiting speed (oil) | 3000 rpm |
| Abutment & Fillet Dimensions | Shaft abutment reference diameter (db) | 157 mm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 232 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 3 mm |
| Abutment & Fillet Dimensions | Minimum flange chamfer (r34) | 3 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 2.5 mm |
| Abutment & Fillet Dimensions | Maximum flange fillet radius (rb) | 2.5 mm |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
NJ228EM Rib Design, Suffix Meaning & 140 mm Series Comparison
In the NJ228EM designation, NJ defines a separable single-row cylindrical roller bearing with two integral ribs on the outer ring and one integral rib on the straight-bore inner ring, providing single-direction axial shaft location. Where bidirectional axial location is needed, engineers either mount two NJ228EM bearings in an opposed pair or add a matching HJ228E (HJ 228 EC) angle ring on the open inner-ring face. The 2 series code pairs a 140 mm bore (28 × 5) with a compact 250 × 42 mm section; E denotes reinforced internal roller geometry for higher radial capacity, and M indicates ZQM’s machined solid brass cage specification (confirm final cage execution against drawing/batch). See our NJ / NU / NUP cylindrical roller & clearance guide for full rib comparisons.
| Catalogue Model (140 mm Bore) | Dimensions, Fw & Mass | Load Ratings & Locating Role |
|---|---|---|
| NJ228EM (Selected) | 140 × 250 × 42 mm · Fw 169 · 9.43 kg | Cr 395 kN · C0r 515 kN · Single-direction locating |
| NU228EM | 140 × 250 × 42 mm · Fw 169 · 9.36 kg | Cr 395 kN · C0r 515 kN · Non-locating floating end |
| NU2228EM | 140 × 250 × 68 mm · Fw 169 · 15.9 kg | Cr 550 kN · C0r 790 kN · Wide 22-series non-locating |
| NU328EM | 140 × 300 × 62 mm · Fw 180 · 23.7 kg | Cr 665 kN · C0r 880 kN · Heavy 3-series non-locating |
Brand Cross-Reference & Equivalent Designations
The table below summarizes peer cylindrical roller designations sharing the 140 × 250 × 42 mm ISO 15 boundary envelope and NJ single-direction rib layout (review our ISO cross-reference guide before substitution):
| Manufacturer | ISO Nominal Reference | Interchange Verification Scope |
|---|---|---|
| ZQM Bearings | NJ228EM / NJ228EM C3 |
ZQM factory catalogue specification; straight cylindrical bore, Fw = 169 mm |
| SKF | NJ 228 ECM / NJ 228 ECML/C3 | Reinforced EC internal geometry with machined brass cage; confirm C3 & Fw |
| FAG / Schaeffler | NJ228-E-XL-M1 / NJ228-E-M1-C3 | E-series brass cage M1 design; verify clearance group and rib lubrication |
| NSK | NJ228EM / NJ228EMC3 | High-capacity E-design cylindrical roller series; verify Fw = 169 mm match |
| NTN | NJ228E / NJ228EG1C3 | Reinforced E-series with G1 machined brass cage; confirm radial clearance |
ISO Nominal Boundary Disclaimer: Listed cross-references match ISO 15 nominal boundary dimensions (140 × 250 × 42 mm) only and do not imply automatic direct interchangeability—especially when mating separable inner rings across different brands. Confirm roller under-diameter Fw (169 mm), cage design, chamfer radii, and radial clearance prior to installation.
Industrial Applications & Operating Conditions
Combining high-speed capability (up to 3,000 rpm oil) with single-direction axial guidance and easy separable assembly, NJ228EM serves industrial power-transmission drives across mining and crusher pinion drives and general heavy machinery (see all industrial sectors):
| Equipment Application | Speed & Load Profile | Mounting & Arrangement Notes |
|---|---|---|
| Industrial Helical Gearboxes & Crusher Pinion Shafts | High radial gear-mesh force with unidirectional helical axial thrust | Opposed pair of NJ228EM bearings or NJ228EM + HJ228E (HJ 228 EC) angle ring handles reversing axial loads |
| Large AC Industrial Motors & Traction Drive Ends | Heavy belt/coupling radial overhang at 1,500–2,400 rpm | Separable inner ring lets technicians heat-mount the inner ring on the 140 mm rotor shaft independently |
| Rotary Compressors & High-Head Centrifugal Pumps | Continuous radial load with moderate unidirectional thrust | Verify shaft abutment db min 157 mm and housing shoulder Da max 232 mm (plus axial rib-backing shoulder on assembly drawing under heavy thrust) |
| Steel Mill Auxiliary Drives & Conveyor Reducers | Cyclic shock torque in compact 42 mm axial housing width | Specify C3 radial clearance when heavy shaft press fits coincide with elevated gearbox oil temperatures |
Ordering NJ228EM & Pre-Order Checklist
ZQM Bearings supplies NJ228EM from our Wafangdian production base via Ningbo export coordination and Shanghai stock handling, supporting sample trials, mixed-SKU maintenance orders, and scheduled OEM shipments. Verify three technical items before requesting a quotation:
| Pre-Order Checkpoint | Information to Confirm | Engineering Purpose |
|---|---|---|
| 1. Locating Arrangement & Clearance | Confirm NJ228EM straight bore, CN or C3 clearance, and whether an HJ228E (HJ 228 EC) angle ring is needed |
Ensures correct axial location direction and prevents binding under operating heat |
| 2. Abutment & Fw Check | Verify db min 157 mm, Da max 232 mm, r1,2/r3,4 min 3 mm, ra/rb max 2.5 mm, and Fw 169 mm | Protects chamfer clearance and guarantees proper seating of separable inner-ring rib |
| 3. Quantity & Delivery Terms | Unit mass 9.43 kg; state order quantity, EXW/FOB/CIF terms, and inspection paperwork needed | Confirms batch lead time, protective export crating, and dimensional/hardness QC records |
Frequently Asked Questions (FAQ)
What are the exact boundary dimensions, Fw, and load ratings of NJ228EM?
According to ZQM Bearings’ online catalogue database, NJ228EM measures 140 mm bore × 250 mm outside diameter × 42 mm width with a roller under-diameter Fw = 169 mm and reference mass of 9.43 kg. Its basic dynamic load rating is Cr = 395 kN, basic static load rating is C0r = 515 kN, and limiting speeds are 2,400 rpm (grease) and 3,000 rpm (oil).
How does NJ228EM handle axial thrust, and how do you achieve bidirectional shaft location?
The single integral rib on the NJ228EM inner ring locates the shaft axially in one direction only. To locate a 140 mm shaft in both axial directions, mount two NJ228EM bearings facing opposite directions or pair NJ228EM with a separate HJ228E (HJ 228 EC) angle ring positioned against the flangeless side of the inner ring.
Why must maintenance teams verify Fw = 169 mm on separable NJ228EM bearings?
Because the inner ring separates from the outer-ring/roller assembly during installation, replacement assemblies must match both the 140 × 250 × 42 mm envelope and the Fw = 169 mm roller envelope diameter. Mixing separable rings across different internal designs (such as standard M vs. reinforced EM) can alter radial clearance and roller contact stress.
When should engineers choose NJ228EM instead of NU228EM on a 140 mm shaft?
Select NJ228EM when the bearing position must support high radial load while also providing single-direction axial shaft guidance (such as helical pinion shafts or opposed-pair motor drives). Choose NU228EM at the pure-radial floating end where the shaft must expand axially without thrust constraint.
How should radial clearance be checked after mounting NJ228EM?
Press-fitting the separable straight-bore inner ring onto a 140 mm shaft reduces initial unmounted clearance. On cylindrical roller assemblies, post-mount feeler checks confirm mounted residual radial clearance, which must remain sufficient to transition safely into hot operating clearance once the shaft reaches thermal equilibrium—confirm CN vs. C3 against your fit tolerance.






