NJ2326EM Cylindrical Roller Bearing 130 × 280 × 93 mm

NJ2326EM cylindrical roller bearing: 130 × 280 × 93 mm, machined brass (m), dynamic rating Cr 920 kN, static rating Cor 1,230 kN, reference mass 28.9 kg. Verify shaft drawings and request bulk factory pricing from ZQM.

Request a Quote

NJ2326EM Cylindrical Roller Bearing Overview

Engineered with two outer-ring integral ribs and one inner-ring locating flange on a straight cylindrical bore, NJ2326EM (130 × 280 × 93 mm, 28.9 kg) handles heavy radial shock while locating a 130 mm shaft axially in one direction. Reinforced E-series rollers and a machined brass M cage deliver Cr = 920 kN, Cor = 1,230 kN, Fw = 167 mm, and speeds up to 1,800 rpm grease / 2,200 rpm oil.

Envelope (d × D × B)130 × 280 × 93 mm
Dynamic / Static RatingCr 920 / C0r 1,230 kN
Limiting Speed (Grease / Oil)1,800 / 2,200 rpm
Reference Mass · Execution28.9 kg · Machined Brass (M)

NJ2326EM Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: NJ2326EM
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)130 mm
Boundary Dimensions & WeightOutside diameter (D)280 mm
Boundary Dimensions & WeightWidth (B)93 mm
Boundary Dimensions & WeightRoller set under-raceway diameter (Fw)167 mm
Boundary Dimensions & WeightReference mass (Weight)28.9 kg
Load Ratings & Limiting SpeedsBasic dynamic load rating (Cr)920 kN
Load Ratings & Limiting SpeedsBasic static load rating (Cor)1230 kN
Load Ratings & Limiting SpeedsLimiting speed (grease)1800 rpm
Load Ratings & Limiting SpeedsLimiting speed (oil)2200 rpm
Abutment & Fillet DimensionsShaft abutment reference diameter (db)149 mm
Abutment & Fillet DimensionsHousing abutment diameter (Da)258 mm
Abutment & Fillet DimensionsMinimum chamfer dimension (r12)4 mm
Abutment & Fillet DimensionsMinimum flange chamfer (r34)4 mm
Abutment & Fillet DimensionsMaximum fillet radius (ra)3 mm
Abutment & Fillet DimensionsMaximum flange fillet radius (rb)3 mm

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Designation Breakdown & 130 mm Bore Selection

Key execution codes for NJ2326EM and engineering comparison across 130 mm bore catalogue alternatives:

Attribute Code / Option Engineering Notes
NJ / NU & EM Execution NJ2326EM Outer ring 2 ribs, inner ring 1 rib (single-direction axial locating); reinforced E rollers; machined brass cage (M); straight cylindrical bore
Internal Clearance C0 (Normal) / C3 Select C3 radial clearance when heavy shaft interference fits or 2,200+ rpm heat reduce operating play
Under-Roller Envelope Fw = 167 mm Straight-bore inner raceway allows separable mounting; Ew and Db/da: Contact us for specifications

Compared with floating NU2326EM of identical 130 × 280 × 93 mm dimensions, NJ2326EM adds a single inner-ring flange for one-direction axial location; for narrower 58 mm housing width with Cr 615 kN, compare NJ326EM.

Catalogue Unit Envelope & Mass Ratings & Grease Limit
NJ2326EM (Current) 130 × 280 × 93 mm · 28.9 kg Cr 920 kN · C0r 1,230 kN · 1,800 rpm
NU2326EM 130 × 280 × 93 mm · 28.7 kg Cr 920 kN · C0r 1,230 kN · 1,800 rpm
NJ326EM 130 × 280 × 58 mm · 19.5 kg Cr 615 kN · C0r 735 kN · 1,800 rpm
NJ2320M 100 × 215 × 73 mm · 13.5 kg Cr 440 kN · C0r 630 kN · 2,400 rpm

Brand Cross-Reference & Interchangeability

Manufacturer designations sharing the 130 × 280 × 93 mm nominal ISO boundary envelope (full product catalog):

Manufacturer Reference Code Verification Scope
ZQM Bearings NJ2326EM Machined brass cage cylindrical unit per ISO 15 boundary dimensions
SKF NJ 2326 ECM Reinforced cylindrical design with machined brass cage
FAG / Schaeffler NJ2326-E-XL-M1 X-life cylindrical series with M1 solid brass cage
NSK NJ2326EM High-capacity cylindrical series with brass cage
NTN NJ2326EG1 Machined brass cage industrial execution

Engineering Interchange Disclaimer: Cross-reference for identification only. Verify interchangeability with engineering drawings. Listed references share nominal ISO boundary dimensions (130 × 280 × 93 mm) only; internal geometry, cage execution, and load ratings vary by manufacturer.

Industrial Applications & Mounting Guidance (130 mm Shaft Class)

Primary machinery roles and field mounting practices matched to this 130 × 280 × 93 mm assembly:

Target Machinery Operating Duty Profile Mounting & Lubrication Practice
Heavy Industrial Reducers & Mill Pinion Stands Extreme gear-mesh radial loads with single-direction helical thrust Separable single-rib inner ring mounts onto 130 mm pinion shafts prior to housing assembly
Mining Crushers & Vibrating Screen Drive Shafts Severe impact vibration requiring rigid pocket retention One-piece machined brass M cage resists fatigue fracture under cyclic acceleration
Rolling Mill Roll-Neck & Heavy Electric Motors High-torque 130 mm straight bore drives up to 2,200 rpm oil Pair with NU2326EM on the non-locating end to absorb thermal shaft expansion

For reliable service life under ISO 281 fatigue calculations, maintain clean oil filtration, monitor housing temperature stabilization after initial run-in, and verify shaft journal roundness and shoulder squareness against the published abutment geometry before final press or sleeve installation. Post-mount feeler gauge measurements (on applicable radial structures) confirm mounted residual radial clearance—distinguishing it from final operating clearance under thermal equilibrium—while export batches include protective rust-inhibitor coating, individual VCI wrapping, and heavy-duty plywood crating tailored to sea or air transit.

Pre-Order Engineering Checklist

Confirm these three verification checkpoints with our engineering desk prior to scheduling factory dispatch for this 130 × 280 × 93 mm model:

Checkpoint Parameters to Confirm Engineering Purpose
1. Code & Clearance Specify NJ2326EM, C0/C3/C4 play, and straight bore Aligns mounted internal play with shaft interference and running ΔT
2. Shoulder & Fit Limits Verify db 149 mm, Da 258 mm, ra 3 mm; Db/da: Contact us for specifications Prevents chamfer interference and inner-ring creep
3. Quantity & QC Scope Unit mass 28.9 kg; state batch qty, EXW/FOB/CIF terms, and CMM/UT/hardness needs Confirms pallet crating, MOQ lead time, and inspection records

Ready for drawing review, clearance matching, or factory bulk quotation on this 130 mm shaft unit?

Request Technical Quote

Frequently Asked Questions

What are the dimensions, Fw, and mass of NJ2326EM?

ZQM catalogue specs confirm 130 mm straight cylindrical bore, 280 mm outside diameter, 93 mm width, under-roller envelope Fw = 167 mm, and 28.9 kg mass.

How does NJ2326EM differ from NU2326EM in axial location?

NJ2326EM features one integral flange on the inner ring to locate the shaft axially in one direction (or both directions with an HJ thrust collar), whereas NU2326EM has a flangeless inner ring for pure axial float. Contact us for specifications on unquoted Db, da, or Ew.

What abutment and chamfer dimensions apply to NJ2326EM?

Published mounting limits are db min = 149 mm, Da max = 258 mm, minimum chamfer r1,2/r3,4 = 4 mm, and maximum fillet ra/rb = 3 mm; Contact us for specifications on unquoted Db and da shoulder steps.

What clearance and QC options are available for 130 mm heavy drives?

Heavy 130 mm shafts under press fits and thermal load typically require C3 radial internal clearance (CN and C4 available). Request MOQ, export lead time, and CMM/hardness/UT inspection documentation via our quote form.

Scroll to Top