230 SERIES · SPHERICAL ROLLER BEARING
230/800X2CAF3/W33 Spherical Roller Bearing Dimensions & Specifications
230/800X2CAF3/W33 spherical roller bearing: 800 mm bore (d), 1150 mm outside diameter (D), 280 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 800 mm |
|---|---|
| Outside diameter D | 1150 mm |
| Width B | 280 mm |
| Mass | 941 kg |
| Catalogue dynamic load Cr | 8350 kN |
| Catalogue static load Cor | 19100 kN |
| Grease-lubricated speed | 180 rpm |
| Oil-lubricated speed | 220 rpm |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 1114 mm |
|---|---|
| Abutment dimension da | 836 mm |
| Minimum chamfer r12 | 7.5 mm |
| Factor Y0 | 3.1 |
| Factor Y1 | 3.2 |
| Factor Y2 | 4.7 |
| Factor e | 0.21 |
| Maximum fillet ra | 6 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 230/800X2CAF3/W33?
The 230/800X2CAF3/W33 catalogue lists da min = 836 mm; Da max = 1114 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What speed values are available for 230/800X2CAF3/W33?
The listed values for 230/800X2CAF3/W33 are grease: 180 rpm; oil: 220 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.
What is the reference mass of 230/800X2CAF3/W33?
The catalogue reference mass for 230/800X2CAF3/W33 is 941 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 248/800CAF3/W33 | Spherical Roller Bearing | 800 × 980 × 180 mm |
| 249/800CAF1D/W33 | Spherical Roller Bearing | 800 × 1060 × 370 mm |
| 249/800CAF3/W33 | Spherical Roller Bearing | 800 × 1060 × 258 mm |
| 239/800CAF3/W33 | Spherical Roller Bearing | 800 × 1060 × 195 mm |
| 240/800CAF3/W33 | Spherical Roller Bearing | 800 × 1150 × 345 mm |
| 231/800CAF3/W33 | Spherical Roller Bearing | 800 × 1280 × 375 mm |
Compare alternative series sharing the same 800 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
- CA vs CC vs MB vs E Cages in Spherical Roller Bearings: Vibration, Speed & QC
- Tapered Bore Bearings: 1:12 (K) vs 1:30 (K30), Adapter and Withdrawal Sleeves
- Spherical Roller Bearing Series Selection: 239 vs 230 vs 240 vs 231 vs 232 vs 222/223
- 230 Series Spherical Roller Bearings
- Tapered Bore Clearance Calculator
DIRECT FACTORY SOURCING
Request a Quote for 230/800X2CAF3/W33
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

