230 SERIES · SPHERICAL ROLLER BEARING

230/950X2CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

230/950X2CAF3/W33 spherical roller bearing: 950 mm bore (d), 1360 mm outside diameter (D), 320 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 950 mmD 1360 mmB 320 mmCr 11500 kNMass 1447 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 950D 1360B 320

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d950 mm
Outside diameter D1360 mm
Width B320 mm
Mass1447 kg
Catalogue dynamic load Cr11500 kN
Catalogue static load Cor28000 kN
Grease-lubricated speed130 rpm
Oil-lubricated speed180 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1324 mm
Abutment dimension da986 mm
Minimum chamfer r127.5 mm
Factor Y03.25
Factor Y13.33
Factor Y24.96
Factor e0.2
Maximum fillet ra6 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 230/950X2CAF3/W33?

The 230/950X2CAF3/W33 catalogue lists da min = 986 mm; Da max = 1324 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 230/950X2CAF3/W33?

The listed values for 230/950X2CAF3/W33 are grease: 130 rpm; oil: 180 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 230/950X2CAF3/W33?

The catalogue reference mass for 230/950X2CAF3/W33 is 1447 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 950 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
249/950CAF1D/W33Spherical Roller Bearing950 × 1250 × 420 mm
249/950CAF3/W33Spherical Roller Bearing950 × 1250 × 300 mm
239/950CAF3/W33Spherical Roller Bearing950 × 1250 × 224 mm
240/950CAF3/W33Spherical Roller Bearing950 × 1360 × 412 mm

Compare alternative series sharing the same 950 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 230/950X2CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top