238 SERIES · SPHERICAL ROLLER BEARING

238/1000CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

238/1000CAF3/W33 spherical roller bearing: 1000 mm bore (d), 1220 mm outside diameter (D), 165 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1000 mmD 1220 mmB 165 mmCr 4427 kNMass 410 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1000D 1220B 165

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1000 mm
Outside diameter D1220 mm
Width B165 mm
Mass410 kg
Catalogue dynamic load Cr4427 kN
Catalogue static load Cor13585 kN
Grease-lubricated speed160 rpm
Oil-lubricated speed200 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1192 mm
Abutment dimension da1028 mm
Minimum chamfer r126 mm
Factor Y05.6
Factor Y15.6
Factor Y28.4
Factor e0.12
Maximum fillet ra5 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 238/1000CAF3/W33?

The 238/1000CAF3/W33 catalogue lists da min = 1028 mm; Da max = 1192 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 238/1000CAF3/W33?

The listed values for 238/1000CAF3/W33 are grease: 160 rpm; oil: 200 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 238/1000CAF3/W33?

The catalogue reference mass for 238/1000CAF3/W33 is 410 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 1000 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/1000CAF3/W33Spherical Roller Bearing1000 × 1220 × 218 mm
249/1000CAF3/W33Spherical Roller Bearing1000 × 1320 × 315 mm
239/1000CAF3/W33Spherical Roller Bearing1000 × 1320 × 236 mm
240/1000CAF3/W33Spherical Roller Bearing1000 × 1420 × 412 mm
241/1000CAF3/W33Spherical Roller Bearing1000 × 1580 × 580 mm
231/1000CAF3/W33Spherical Roller Bearing1000 × 1580 × 462 mm

Compare alternative series sharing the same 1000 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 238/1000CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top