238 SERIES · SPHERICAL ROLLER BEARING

238/1120CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

238/1120CAF3/W33 spherical roller bearing: 1120 mm bore (d), 1360 mm outside diameter (D), 180 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1120 mmD 1360 mmB 180 mmCr 6200 kNMass 536 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1120D 1360B 180

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1120 mm
Outside diameter D1360 mm
Width B180 mm
Mass536 kg
Catalogue dynamic load Cr6200 kN
Catalogue static load Cor18700 kN
Grease-lubricated speed140 rpm
Oil-lubricated speed180 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1332 mm
Abutment dimension da1148 mm
Minimum chamfer r126 mm
Factor Y05.84
Factor Y15.97
Factor Y28.89
Factor e0.11
Maximum fillet ra5 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 238/1120CAF3/W33?

The 238/1120CAF3/W33 catalogue lists da min = 1148 mm; Da max = 1332 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 238/1120CAF3/W33?

The listed values for 238/1120CAF3/W33 are grease: 140 rpm; oil: 180 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 238/1120CAF3/W33?

The catalogue reference mass for 238/1120CAF3/W33 is 536 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 1120 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/1120CAF3/W33Spherical Roller Bearing1120 × 1360 × 243 mm
249/1120CAF1D/W33Spherical Roller Bearing1120 × 1460 × 500 mm
249/1120CAF3/W33Spherical Roller Bearing1120 × 1460 × 335 mm
239/1120CAF3/W33Spherical Roller Bearing1120 × 1460 × 250 mm
230/1120X3CAF1D/W33Spherical Roller Bearing1120 × 1540 × 525 mm
230/1120CAF3/W33Spherical Roller Bearing1120 × 1580 × 345 mm

Compare alternative series sharing the same 1120 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 238/1120CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top