239 SERIES · SPHERICAL ROLLER BEARING

239/1180CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

239/1180CAF3/W33 spherical roller bearing: 1180 mm bore (d), 1540 mm outside diameter (D), 272 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1180 mmD 1540 mmB 272 mmCr 10545 kNMass 1400 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1180D 1540B 272

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1180 mm
Outside diameter D1540 mm
Width B272 mm
Mass1400 kg
Catalogue dynamic load Cr10545 kN
Catalogue static load Cor29450 kN
Grease-lubricated speed110 rpm
Oil-lubricated speed140 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1504 mm
Abutment dimension da1216 mm
Minimum chamfer r127.5 mm
Factor Y04
Factor Y14.2
Factor Y26.3
Factor e0.16
Maximum fillet ra6 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 239/1180CAF3/W33?

The 239/1180CAF3/W33 catalogue lists da min = 1216 mm; Da max = 1504 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 239/1180CAF3/W33?

The listed values for 239/1180CAF3/W33 are grease: 110 rpm; oil: 140 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 239/1180CAF3/W33?

The catalogue reference mass for 239/1180CAF3/W33 is 1400 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 1180 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
238/1180CAF3/W33Spherical Roller Bearing1180 × 1420 × 180 mm
248/1180CAF3/W33Spherical Roller Bearing1180 × 1420 × 243 mm
249/1180CAF3/W33Spherical Roller Bearing1180 × 1540 × 355 mm
240/1180CAF3/W33Spherical Roller Bearing1180 × 1660 × 475 mm
618/1180F1Deep Groove Ball Bearing1180 × 1420 × 106 mm
NJ18/1180Cylindrical Roller Bearing1180 × 1420 × 106 mm

Compare alternative series sharing the same 1180 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 239/1180CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top