238 SERIES · SPHERICAL ROLLER BEARING

238/1180CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

238/1180CAF3/W33 spherical roller bearing: 1180 mm bore (d), 1420 mm outside diameter (D), 180 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1180 mmD 1420 mmB 180 mmCr 5576 kNMass 575 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1180D 1420B 180

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1180 mm
Outside diameter D1420 mm
Width B180 mm
Mass575 kg
Catalogue dynamic load Cr5576 kN
Catalogue static load Cor17670 kN
Grease-lubricated speed120 rpm
Oil-lubricated speed160 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da1392 mm
Abutment dimension da1208 mm
Minimum chamfer r126 mm
Factor Y06.3
Factor Y16.1
Factor Y29.1
Factor e0.11
Maximum fillet ra5 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 238/1180CAF3/W33?

The 238/1180CAF3/W33 catalogue lists da min = 1208 mm; Da max = 1392 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 238/1180CAF3/W33?

The listed values for 238/1180CAF3/W33 are grease: 120 rpm; oil: 160 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 238/1180CAF3/W33?

The catalogue reference mass for 238/1180CAF3/W33 is 575 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 1180 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/1180CAF3/W33Spherical Roller Bearing1180 × 1420 × 243 mm
239/1180CAF3/W33Spherical Roller Bearing1180 × 1540 × 272 mm
249/1180CAF3/W33Spherical Roller Bearing1180 × 1540 × 355 mm
240/1180CAF3/W33Spherical Roller Bearing1180 × 1660 × 475 mm
618/1180F1Deep Groove Ball Bearing1180 × 1420 × 106 mm
NJ18/1180Cylindrical Roller Bearing1180 × 1420 × 106 mm

Compare alternative series sharing the same 1180 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 238/1180CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top