239 SERIES · SPHERICAL ROLLER BEARING

239/1500CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

239/1500CAF3/W33 spherical roller bearing: 1500 mm bore (d), 1950 mm outside diameter (D), 335 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1500 mmD 1950 mmB 335 mmCr 16000 kNMass 2800 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1500D 1950B 335

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1500 mm
Outside diameter D1950 mm
Width B335 mm
Mass2800 kg
Catalogue dynamic load Cr16000 kN
Catalogue static load Cor47500 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da1784 mm
Abutment dimension da1544 mm
Minimum chamfer r129.5 mm
Factor Y04.1
Factor Y14.2
Factor Y26.3
Factor e0.16
Maximum fillet ra6 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 239/1500CAF3/W33?

The 239/1500CAF3/W33 catalogue lists da min = 1544 mm; Da max = 1784 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of 239/1500CAF3/W33?

The catalogue reference mass for 239/1500CAF3/W33 is 2800 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 239/1500CAF3/W33?

In the ZQM General Catalogue, 239/1500CAF3/W33 has nominal boundary dimensions of Array. Catalog load ratings: Cr 16000 kN, C0r 47500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Other Bearing Series with 1500 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/1500CAF3/W33Spherical Roller Bearing1500 × 1820 × 315 mm
249/1500CAF3/W33Spherical Roller Bearing1500 × 1950 × 450 mm
618/1500F1Deep Groove Ball Bearing1500 × 1820 × 140 mm

Compare alternative series sharing the same 1500 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 239/1500CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top