248 SERIES · SPHERICAL ROLLER BEARING

248/1500CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

248/1500CAF3/W33 spherical roller bearing: 1500 mm bore (d), 1820 mm outside diameter (D), 315 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1500 mmD 1820 mmB 315 mmCr 11115 kNMass 1700 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1500D 1820B 315

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1500 mm
Outside diameter D1820 mm
Width B315 mm
Mass1700 kg
Catalogue dynamic load Cr11115 kN
Catalogue static load Cor38475 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da1684 mm
Abutment dimension da1536 mm
Minimum chamfer r127.5 mm
Factor Y03.2
Factor Y13.2
Factor Y24.8
Factor e0.21
Maximum fillet ra6 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 248/1500CAF3/W33?

The 248/1500CAF3/W33 catalogue lists da min = 1536 mm; Da max = 1684 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of 248/1500CAF3/W33?

The catalogue reference mass for 248/1500CAF3/W33 is 1700 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 248/1500CAF3/W33?

In the ZQM General Catalogue, 248/1500CAF3/W33 has nominal boundary dimensions of Array. Catalog load ratings: Cr 11115 kN, C0r 38475 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Other Bearing Series with 1500 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
239/1500CAF3/W33Spherical Roller Bearing1500 × 1950 × 335 mm
249/1500CAF3/W33Spherical Roller Bearing1500 × 1950 × 450 mm
618/1500F1Deep Groove Ball Bearing1500 × 1820 × 140 mm

Compare alternative series sharing the same 1500 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 248/1500CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top