249 SERIES · SPHERICAL ROLLER BEARING

249/1320CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

249/1320CAF3/W33 spherical roller bearing: 1320 mm bore (d), 1720 mm outside diameter (D), 400 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1320 mmD 1720 mmB 400 mmCr 15295 kNMass 2500 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1320D 1720B 400

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1320 mm
Outside diameter D1720 mm
Width B400 mm
Mass2500 kg
Catalogue dynamic load Cr15295 kN
Catalogue static load Cor46550 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da1684 mm
Abutment dimension da1356 mm
Minimum chamfer r127.5 mm
Factor Y03.2
Factor Y13.2
Factor Y24.8
Factor e0.21
Maximum fillet ra6 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 249/1320CAF3/W33?

The 249/1320CAF3/W33 catalogue lists da min = 1356 mm; Da max = 1684 mm; ra max = 6 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of 249/1320CAF3/W33?

The catalogue reference mass for 249/1320CAF3/W33 is 2500 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 249/1320CAF3/W33?

In the ZQM General Catalogue, 249/1320CAF3/W33 has nominal boundary dimensions of Array. Catalog load ratings: Cr 15295 kN, C0r 46550 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Other Bearing Series with 1320 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/1320CAF3/W33Spherical Roller Bearing1320 × 1600 × 280 mm
239/1320CAF3/W33Spherical Roller Bearing1320 × 1720 × 300 mm
240/1320CAF3/W33Spherical Roller Bearing1320 × 1850 × 530 mm
618/1320F1Deep Groove Ball Bearing1320 × 1600 × 122 mm
NU18/1320Cylindrical Roller Bearing1320 × 1600 × 122 mm
NUP18/1320Cylindrical Roller Bearing1320 × 1600 × 122 mm

Compare alternative series sharing the same 1320 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 249/1320CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top