249 SERIES · SPHERICAL ROLLER BEARING

249/1400CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

249/1400CAF3/W33 spherical roller bearing: 1400 mm bore (d), 1820 mm outside diameter (D), 425 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 1400 mmD 1820 mmB 425 mmCr 20000 kNMass 3020 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 1400D 1820B 425

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d1400 mm
Outside diameter D1820 mm
Width B425 mm
Mass3020 kg
Catalogue dynamic load Cr20000 kN
Catalogue static load Cor58500 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da1740 mm
Abutment dimension da1502 mm
Minimum chamfer r129.5 mm
Factor Y03
Factor Y13.1
Factor Y24.6
Factor e0.22
Maximum fillet ra8 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 249/1400CAF3/W33?

The 249/1400CAF3/W33 catalogue lists da min = 1502 mm; Da max = 1740 mm; ra max = 8 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of 249/1400CAF3/W33?

The catalogue reference mass for 249/1400CAF3/W33 is 3020 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 249/1400CAF3/W33?

In the ZQM General Catalogue, 249/1400CAF3/W33 has nominal boundary dimensions of Array. Catalog load ratings: Cr 20000 kN, C0r 58500 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

Other Bearing Series with 1400 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
248/1400CAF3/W33Spherical Roller Bearing1400 × 1700 × 300 mm
239/1400CAF3/W33Spherical Roller Bearing1400 × 1820 × 315 mm
240/1400CAF3/W33Spherical Roller Bearing1400 × 1950 × 545 mm
618/1400F1Deep Groove Ball Bearing1400 × 1700 × 132 mm
N28/1400EMCylindrical Roller Bearing1400 × 1700 × 175 mm

Compare alternative series sharing the same 1400 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 249/1400CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top