249 SERIES · SPHERICAL ROLLER BEARING

249/630CAF3/W33 Spherical Roller Bearing Dimensions & Specifications

249/630CAF3/W33 spherical roller bearing: 630 mm bore (d), 850 mm outside diameter (D), 212 mm width (B). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 630 mmD 850 mmB 212 mmCr 5200 kNMass 371 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
W33Spherical Roller · Cylindrical Bored 630D 850B 212

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d630 mm
Outside diameter D850 mm
Width B212 mm
Mass371 kg
Catalogue dynamic load Cr5200 kN
Catalogue static load Cor12900 kN
Grease-lubricated speed280 rpm
Oil-lubricated speed360 rpm
Mounting dimensions & additional parameters (8)
Abutment dimension Da822 mm
Abutment dimension da658 mm
Minimum chamfer r126 mm
Factor Y02.8
Factor Y12.8
Factor Y24.2
Factor e0.24
Maximum fillet ra5 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for 249/630CAF3/W33?

The 249/630CAF3/W33 catalogue lists da min = 658 mm; Da max = 822 mm; ra max = 5 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What speed values are available for 249/630CAF3/W33?

The listed values for 249/630CAF3/W33 are grease: 280 rpm; oil: 360 rpm. These catalogue references do not determine a safe operating speed on their own. Confirm load, clearance, lubrication and heat conditions for the application.

What is the reference mass of 249/630CAF3/W33?

The catalogue reference mass for 249/630CAF3/W33 is 371 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

Other Bearing Series with 630 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
238/630CAF3/W33Spherical Roller Bearing630 × 780 × 112 mm
248/630CAF3/W33Spherical Roller Bearing630 × 780 × 150 mm
239/630CAF3/W33Spherical Roller Bearing630 × 850 × 165 mm
230/630CAF1D/W33Spherical Roller Bearing630 × 920 × 310 mm
230/630CAF3/W33Spherical Roller Bearing630 × 920 × 212 mm
240/630CAF3/W33Spherical Roller Bearing630 × 920 × 290 mm

Compare alternative series sharing the same 630 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 249/630CAF3/W33

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top