294 SERIES · SPHERICAL ROLLER THRUST BEARING

294/560/HV Spherical Roller Thrust Bearing Dimensions & Specifications

294/560/HV spherical roller thrust bearing: 560 mm bore (d), 980 mm outside diameter (D), 250 mm height (H). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 560 mmD 980 mmH 250 mmCr 12000 kNMass 674 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
d 560D 980H 250Spherical Roller Thrust Bearing (292/293/294)

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d560 mm
Outside diameter D980 mm
Total height H250 mm
Housing washer height C122 mm
Mass674 kg
Catalogue dynamic load Ca12000 kN
Catalogue static load Coa51000 kN
Mounting dimensions & additional parameters (5)
Minimum chamfer r1212 mm
Diameter D1727 mm
Diameter d1830 mm
Offset S328 mm
Shaft washer height B142 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

What is the reference mass of 294/560/HV?

The catalogue reference mass for 294/560/HV is 674 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of 294/560/HV?

In the ZQM General Catalogue, 294/560/HV has nominal boundary dimensions of Array. Catalog load ratings: Ca 12000 kN, C0a 51000 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What lubrication and minimum load rules apply to 294/560/HV spherical roller thrust bearing?

294/560/HV (560 × 980 × 250 mm, total height H = 250 mm and housing washer height C = 122 mm) uses ISO 104 asymmetrical barrel rollers on a self-aligning spherical housing washer for high unidirectional axial loads. Oil lubrication is preferred under heavy load or continuous duty, and adequate minimum axial load must be maintained to prevent roller skidding.

Other Bearing Series with 560 mm Bore

Envelope reference only · Not direct interchange
Swipe horizontally to view full table
ModelTypeDimensions (d×D×B)
238/560CAF3/W33Spherical Roller Bearing560 × 680 × 90 mm
618/560F1Deep Groove Ball Bearing560 × 680 × 56 mm
NJ18/560Cylindrical Roller Bearing560 × 680 × 56 mm
NU28/560Cylindrical Roller Bearing560 × 680 × 72 mm

Compare alternative series sharing the same 560 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for 294/560/HV

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top