ZQM BEARINGS · PRODUCT SERIES

294 Series Spherical Roller Thrust Bearings

This page provides ISO 104 boundary dimensions (d × D × H) and reference mass for 294 series spherical roller thrust bearings. Built with asymmetric barrel-shaped rollers and a sphered housing washer raceway, the 294 series accommodates extreme axial loads alongside shaft deflection in vertical pumps, extruders, marine drives, and hydro turbines.

294 series spherical roller thrust bearing representative image
294 series representative image · For structural reference
41 ModelsCatalogue Rows Listed
100–950 mmBore Diameter (d)
Axial Thrust · Oil Lub.Bore / Design Feature
ISO 104Boundary Standard
SPECIFICATIONS

294 Series Dimensions & Technical Specifications

Select a complete model designation to view confirmed boundary dimensions and reference mass. Dimensions in mm (H = total height, C = housing washer height); mass in kg. Basic axial load ratings (Ca / C0a) in kN; confirm final tolerances and lubrication against drawings.

294 Series Structural Cross-Section Reference

dDHSpherical Roller Thrust Bearing (292/293/294)
294 Series Spherical Roller Thrust (ISO 104 · Asymmetrical Rollers)Primary boundary dimensions are d × D × H (C = housing washer height); self-aligning spherical housing raceway, oil lubrication preferred.

294 Series Master Size Chart

Source: ZQM Master PDF Catalogue (wp_zqm_models_v1) · ISO 104
Swipe horizontally to view full columns
Modeld / mmD / mmH / mmC / mmCa / kNC0a / kNkg
294201002106733840240010.5
294221102307334.41010293018.1
2942412025078371160340017.1
294261302708539.71330390028.3
2942814028085421370420022.2
2943015030090441580490027.9
294321603209546.91740540032.8
29434170340103501680580039.7
2943618036010951.21870650064.2
2943819038011553.72100745075.6
2944020040012256.72290815083.5
29444220420122582350865074.0
29448240440122602420910096.1
2945226048013263282010700101.5
2945628052014568340013100134
2946030054014570350013700140.0
2946432058015575365014600178
2946834062017080440017400218
2947236064017083.5520021000230
2947638067017587.5580024000260
2948040071018589.5635026100310
2948442073018590.5665027500323
29488440780206101755032000410
29488/HV440780206100788034000346.6
29492460800206100690028300420
29496480850224108720031000545
294/500500870224107785033000589
294/530530920236114855037000660
294/560560980250124960042000800
294/560/HV5609802501221200051000674
294/60060010302581271010043000895
294/630630109028013611600515001100
294/630EM6301090280137——989
294/670670115029014012500560001250
294/710710122030814814300655001500
294/750750128031515215100690001680
294/800800136033516216600775002010
294/800A800136033516520200930001658
294/850850144035517218700990002350
294/9009001520372185222001210002760
294/950950160039019128200—3065

A dash indicates the value is not confirmed in the current catalogue dataset. Matching ISO boundary dimensions alone do not confirm direct interchangeability across brands.

Engineering & lubrication notes: Spherical roller thrust bearings normally require oil lubrication due to sliding contact between roller ends and the shaft washer guide flange, and must maintain sufficient minimum axial load during operation to prevent roller skidding. Confirm cage/design suffixes (such as E or EM, verifying actual cage material per manufacturer specification) and mating shaft/housing shoulder diameters before ordering.

Related resources & featured models: View 29426 EM Spherical Roller Thrust Bearing, read our 29000 Series Spherical Roller Thrust Bearing Guide, or contact ZQM Bearings.

SERIES FAQ

294 Series Selection & Supply FAQ

How many 294 series bearing models are listed, and what bore sizes are covered?

This table lists 41 verified 294 series designations from the ZQM General Catalogue spanning bore diameters from 100 mm to 950 mm. Open any model row to inspect full boundary dimensions, catalog load ratings, reference mass, and mounting abutments (da min / Da max / ra max).

How should height H, axial ratings (Ca / C0a) and lubrication be checked for 294 thrust bearings?

The 294 series spherical roller thrust bearings support heavy axial loads and moderate radial loads simultaneously; catalog load values represent basic dynamic axial (Ca) and static axial (C0a) ratings, and total height H is the key axial envelope dimension. Verify minimum axial load and oil lubrication conditions for reliable roller contact.

Are 294 series dimensions directly interchangeable with SKF, FAG, NSK, or NTN?

Listed boundary dimensions follow ISO 15 / ISO 104 / ISO 355 nominal envelopes for cross-referencing against SKF, FAG, NSK, and NTN. Because internal roller geometry, cage design, lubrication grooves, and tolerance classes vary by manufacturer, nominal equivalence does not guarantee direct interchangeability — confirm full original designations or drawings before substitution.

How do I request a factory quote or CAD drawing for 294 series bearings?

Backed by our Wafangdian factory, Ningbo export team, and Shanghai consolidation hub, ZQM supports trial orders, mixed-model MRO lists, and scheduled OEM shipments. Submit your designations, bore/clearance specs, quantity, and destination port via our Contact Us page.

FROM SPECIFICATION TO SUPPLY

Request a Quotation for 294 Series Bearings

One model or a mixed industrial list. Share your complete designation, clearance, and quantity with ZQM Bearings Wafangdian factory & Ningbo export team.

1. Complete DesignationInclude full cage, lube & bore suffixes (CA/W33, EM, K/K30)
2. Bore & ClearanceSpecify straight vs. 1:12 K / 1:30 K30 and CN / C3 / C4
3. Operating ConditionsShare machine position, speed, load & QC documentation
4. Quantity & PackingConfirm trial lot or OEM volume, export crate & destination
Scroll to Top