294 SERIES · SPHERICAL ROLLER THRUST BEARING
294/950 Spherical Roller Thrust Bearing Dimensions & Specifications
294/950 spherical roller thrust bearing: 950 mm bore (d), 1600 mm outside diameter (D), 390 mm height (H). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 950 mm |
|---|---|
| Outside diameter D | 1600 mm |
| Total height H | 390 mm |
| Housing washer height C | 191 mm |
| Mass | 3065 kg |
| Catalogue dynamic load Ca | 28200 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 1400 mm |
|---|---|
| Abutment dimension da | 1275 mm |
| Minimum chamfer r12 | 15 mm |
| Diameter D1 | 1209 mm |
| Diameter d1 | 1470 mm |
| Maximum fillet ra | 12 mm |
| Offset S | 546 mm |
| Shaft washer height B | 153 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Selection & installation
Which mounting dimensions are listed for 294/950?
The 294/950 catalogue lists da min = 1275 mm; Da max = 1400 mm; ra max = 12 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 294/950?
The catalogue reference mass for 294/950 is 3065 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of 294/950?
In the ZQM General Catalogue, 294/950 has nominal boundary dimensions of Array. Catalog load ratings: Ca 28200 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What lubrication and minimum load rules apply to 294/950 spherical roller thrust bearing?
294/950 (950 × 1600 × 390 mm, total height H = 390 mm and housing washer height C = 191 mm) uses ISO 104 asymmetrical barrel rollers on a self-aligning spherical housing washer for high unidirectional axial loads. Oil lubrication is preferred under heavy load or continuous duty, and adequate minimum axial load must be maintained to prevent roller skidding.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 618/950F1 | Deep Groove Ball Bearing | 950 × 1150 × 90 mm |
Compare alternative series sharing the same 950 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
- Spherical Roller Thrust Bearings (293 vs 294): Minimum Axial Load, Oil Lubrication, and Alignment
- 29000 Series Spherical Roller Thrust Bearings (292, 293, 294): Housing, Minimum Load & Oil Bath
- Bearing Cross Reference & ISO Suffix Guide: Comparing SKF, FAG, NSK, NTN and ZQM
- 294 Series Spherical Roller Thrust Bearings
- ISO 281 Bearing Life Calculator
DIRECT FACTORY SOURCING
Request a Quote for 294/950
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

