294 SERIES · SPHERICAL ROLLER THRUST BEARING
294/900 Spherical Roller Thrust Bearing Dimensions & Specifications
294/900 spherical roller thrust bearing: 900 mm bore (d), 1520 mm outside diameter (D), 372 mm height (H). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.
Nominal Cross-Section & Boundary Dimensions
Unit: mm · Schematic (not to scale)Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.
| Bore d | 900 mm |
|---|---|
| Outside diameter D | 1520 mm |
| Total height H | 372 mm |
| Housing washer height C | 185 mm |
| Mass | 2760 kg |
| Catalogue dynamic load Ca | 22200 kN |
| Catalogue static load Coa | 121000 kN |
Mounting dimensions & additional parameters (8)
| Abutment dimension Da | 1315 mm |
|---|---|
| Abutment dimension da | 1190 mm |
| Minimum chamfer r12 | 15 mm |
| Diameter D1 | 1164 mm |
| Diameter d1 | 1450 mm |
| Maximum fillet ra | 12 mm |
| Offset S | 520 mm |
| Shaft washer height B | 135 mm |
Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.
Catalog Nominal Cross-References (Brand / Legacy Codes)
Envelope reference only · Verify interchangeability| Brand / Code Type | Reference Code | Catalogue Source |
|---|---|---|
| Legacy Code | 90394/900 | ZQM Catalogue P.257 |
Notice: Cross-references above are listed from the ZQM Master Catalogue for nominal boundary-dimension lookup only. Internal clearance, cage design, roller profile, and load ratings vary by manufacturer; verify drawings before substitution.
Selection & installation
Which mounting dimensions are listed for 294/900?
The 294/900 catalogue lists da min = 1190 mm; Da max = 1315 mm; ra max = 12 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.
What is the reference mass of 294/900?
The catalogue reference mass for 294/900 is 2760 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.
What are the main dimensions and load ratings of 294/900?
In the ZQM General Catalogue, 294/900 has nominal boundary dimensions of Array. Catalog load ratings: Ca 22200 kN, C0a 121000 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.
What lubrication and minimum load rules apply to 294/900 spherical roller thrust bearing?
294/900 (900 × 1520 × 372 mm, total height H = 372 mm and housing washer height C = 185 mm) uses ISO 104 asymmetrical barrel rollers on a self-aligning spherical housing washer for high unidirectional axial loads. Oil lubrication is preferred under heavy load or continuous duty, and adequate minimum axial load must be maintained to prevent roller skidding.
| Model | Type | Dimensions (d×D×B) |
|---|---|---|
| 248/900CAF3/W33 | Spherical Roller Bearing | 900 × 1090 × 190 mm |
| 618/900F1 | Deep Groove Ball Bearing | 900 × 1090 × 85 mm |
| NU18/900 | Cylindrical Roller Bearing | 900 × 1090 × 85 mm |
Compare alternative series sharing the same 900 mm shaft bore diameter to review envelope dimensions (D × B) and ring/rib configurations. Shared bore diameter does not imply direct interchangeability.
Related ZQM Products & Engineering Guides
Featured Stock & Production Models
Technical Guides & Series
- Spherical Roller Thrust Bearings (293 vs 294): Minimum Axial Load, Oil Lubrication, and Alignment
- 29000 Series Spherical Roller Thrust Bearings (292, 293, 294): Housing, Minimum Load & Oil Bath
- Bearing Cross Reference & ISO Suffix Guide: Comparing SKF, FAG, NSK, NTN and ZQM
- 294 Series Spherical Roller Thrust Bearings
- ISO 281 Bearing Life Calculator
DIRECT FACTORY SOURCING
Request a Quote for 294/900
Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

