Four-Point Contact Ball Bearings
35° contact-angle QJ and QJF split-ring four-point contact ball bearings—including -0.5 mm special OD rolling mill locating models—for bidirectional axial thrust.
Four-Point Contact Ball Bearing Matrix (QJF / QJ -0.5 mm Special OD)
Compact single-row 35° angular contact locating bearings engineered for rolling mills, compressors, and high-speed gearboxes.
| Bearing Series | Load & Structure Profile | Bore / Dimension Rule | Typical Heavy-Duty Equipment | Direct Resource |
|---|---|---|---|---|
| QJF1048X1MB | 240 × 359.5 × 56 mm (20.9 kg) | -0.5 mm special OD vs 360 mm | Medium mill roll-necks & compressor axial location | View Specs |
| QJF1052X1MB | 260 × 399.5 × 65 mm (31.3 kg) | -0.5 mm special OD vs 400 mm | Heavy industrial gearbox & strip mill locating end | View Specs |
| 116756 / QJF1058MB | 280 × 419.5 × 65 mm (33.6 kg) | -0.5 mm special OD vs 420 mm | Legacy 116756 cross-ref steel mill axial thrust assembly | View Specs |
| QJF1060X3MB | 300 × 459.5 × 68 mm (48.2 kg) | -0.5 mm special OD vs 460 mm | Large rolling mill & heavy reducer bidirectional thrust | View Specs |
Critical -0.5 mm Housing Clearance Rule: ZQM QJF1048X1MB (359.5 mm), QJF1052X1MB (399.5 mm), 116756 / QJF1058MB (419.5 mm), and QJF1060X3MB (459.5 mm) have a purposeful -0.5 mm reduced OD so the outer ring floats radially in a standard integer housing bore and carries pure bidirectional axial load.
Connected Engineering Tools and Industry Guides
116756 / QJF1058MB Guide
Legacy designation 116756 housing fit and 419.5 mm vs 420 mm prevention.
Steel Rolling Mills Hub
How QJF locating bearings pair with FC/FCD four-row cylindrical bearings.
Bearing Suffix Decoder
Identify QJF/QJ split-ring and MB/MA brass cage designations.
Engineering and Procurement FAQ
Why do ZQM QJF rolling mill locating bearings feature a -0.5 mm reduced outside diameter?
Reducing the outer diameter by 0.5 mm relative to a standard integer housing bore guarantees radial clearance on the outer ring, ensuring the bearing takes pure bidirectional axial thrust while adjacent cylindrical roller bearings carry all radial loads.
What is the structural difference between QJ and QJF four-point contact ball bearings?
Both are 35° contact-angle four-point contact ball bearings with a split inner ring (QJ) or split outer ring (QJF) and solid machined brass cage (MA/MB) to simplify mounting and carry heavy bidirectional axial loads in minimal axial width.
Do QJF four-point contact ball bearings use a tapered K bore?
No. Standard QJ and QJF four-point contact ball bearings have cylindrical straight bores; verify shaft interference and axial clamping torque against the engineering drawing.
How do I verify replacement of legacy code 116756 or non-standard QJF models?
Confirm the exact measured outside diameter (including the .5 mm decimal), split-ring orientation, and axial play via our Contact page before ordering.
Need Technical Confirmation or Factory Export Pricing?
Send your bearing designations, dimensional drawings, clearance requirements, and destination port to our Wafangdian factory and Ningbo export teams.


