Four-Row Tapered Roller Bearings

Metric TQO and North American inch-series (LM/EE) four-row tapered roller rolling mill bearings with factory-matched ground spacers for combined radial and axial roll-neck loads.

TQO METRIC & TIMKEN INCH · COMBINED ROLL-NECK LOADS

Four-Row Tapered Roller Bearing Matrix (TQO / LM / EE Mill Series)

Factory-matched four-row tapered assemblies carrying extreme radial and bidirectional axial rolling forces without auxiliary thrust bearings.

Series Engineering Matrix

ZQM Verified Engineering Basis
Bearing Series Load & Structure Profile Bore / Dimension Rule Typical Heavy-Duty Equipment Direct Resource
540TQO760-1 540 × 760 × 560 mm (809 kg) Metric TQO Design 1 (e=0.33) Compact cold & tandem rolling mill roll-necks View Specs
LM277149DA / 110 / 110D 558.8 × 736.6 × 457.2 mm (525 kg) Inch 22"×29"×18" (e=0.33) North American & European hot/cold strip mill rolls View Specs
560TQO920-1 560 × 920 × 575 mm (1,560 kg) Heavy Metric TQO (e=0.39) Heavy wide-plate reversing & hot strip backup rolls View Specs

Matched Spacer Set Rule (BEN): Every TQO and inch four-row tapered roller bearing is factory-ground as a serialized matched set (double cones, cups, and calibrated inner/outer spacers). Never mix rings or spacers across serial numbers, and never apply radial feeler-gauge rules to tapered roll-neck assemblies.

Connected Engineering Tools and Industry Guides

Steel Rolling Mills Hub

Complete hot strip, cold tandem, and plate mill bearing solutions.

Four-Row Cylindrical Hub

Compare TQO combined-load sets with FC/FCD high-speed radial mill bearings.

ZQM Quality & CMM Lab

See how ZQM verifies spacer height, hardness, and NDT on mill bearings.

Engineering and Procurement FAQ

Why do rolling mills choose TQO four-row tapered roller bearings over FC four-row cylindrical bearings?

TQO four-row tapered roller bearings carry both extreme radial separating force and bidirectional axial thrust inside a single chock assembly, eliminating the need for separate thrust bearings at low-to-medium rolling speeds.

How is internal clearance (BEN) controlled on a four-row tapered roller bearing?

Mounted axial clearance (bench endplay / BEN) is established at the factory by precision-grinding the intermediate cone and cup spacer rings as a matched serialized set. Do not intermix spacers between bearing sets.

Does ZQM supply both metric TQO and inch Timken-interchange roll-neck bearings?

Yes. Our factory catalogue covers both metric TQO designs (such as 540TQO760-1 and 560TQO920-1) and North American/European inch assemblies (such as LM277149DA/LM277110/LM277110D, 558.8 × 736.6 × 457.2 mm).

What information is needed to quote a four-row tapered rolling mill bearing?

Submit full designation, bore × OD × overall width T, helical bore groove / seal requirements, desired axial clearance (BEN), and roll-neck drawing via our Contact page.

FACTORY DIRECT SUPPLY

Need Technical Confirmation or Factory Export Pricing?

Send your bearing designations, dimensional drawings, clearance requirements, and destination port to our Wafangdian factory and Ningbo export teams.

Scroll to Top