560TQO920-1 Four-Row Tapered Roller Bearing 560 × 920 × 575 mm

ZQM 560TQO920-1 Heavy-Section Metric TQO Four-Row Tapered Roller Bearing (560 × 920 × 575 mm, 1,560 kg, e = 0.39) engineered for extreme rolling forces on wide-plate reversing and hot strip mills.

SKU: 560TQO9201 Category:

Request a Quote

The ZQM 560TQO920-1 is a massive, heavy-section metric TQO four-row tapered roller bearing engineered for high-tonnage wide-plate reversing stands, thick-slab roughers, and heavy hot strip mill roll-necks. Verified in ZQM’s factory catalogue (P236-R25-single) at 560 × 920 × 575 mm (overall width T) with a substantial reference mass of 1,560 kg, its steep-angle heavy cross-section (e = 0.39, K = 1.50) delivers superior combined radial and axial thrust resilience under reversing shock loads.

560TQO920-1 Technical Specifications & Dimensions

Data Source: ZQM Factory PDF Catalogue DB (v1)Status: Catalogue Reference ValuesCatalogue Ref: 560TQO920-1
Parameter CategoryTechnical Parameter (Symbol)Catalogue Reference Value
Boundary Dimensions & WeightBore diameter (d)560 mm
Boundary Dimensions & WeightOutside diameter (D)920 mm
Boundary Dimensions & WeightOverall width (T)575 mm
Boundary Dimensions & WeightCatalogue design designation (design)1
Boundary Dimensions & WeightReference mass (Weight)1560 kg
Calculation FactorsCalculation factor (e)0.39
Calculation FactorsAxial geometry factor (K)1.50
Calculation FactorsAxial load factor (static) (Y0)1.7
Calculation FactorsAxial load factor (Y1)1.7
Calculation FactorsAxial load factor (Y2)2.6

Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.

Heavy-Section 560TQO920-1 Engineering Profile

  • High Axial Thrust Proportion (e = 0.39, K = 1.50): Compared with shallower compact TQO units (e = 0.33), the steeper contact angle (Y1 = 1.7, Y2 = 2.6, Y0 = 1.7) provides heightened axial load capability during heavy wide-plate reversing passes and roll-shifting operations.
  • 1,560 kg Ultra-Rigid Section (180 mm Radial Wall): Thick carburized or through-hardened rings (confirmed per drawing) resist hoop-stress cracking and raceway indentation under severe slab-entry impact peaks.
  • Serialized Matched Spacer Control (BEN): Supplied as a single factory-serialized TQO Design 1 set with precision-ground inner and outer spacers setting mounted bench endplay; never swap rings across serial numbers.
  • Honest Catalogue Transparency: Printed catalogue page P236 specifies boundary dimensions, mass (1,560 kg), and ISO axial factors; dynamic/static load ratings, case-hardening depth, and UT/MPI NDT schedules are issued per drawing confirmation.

Nominal Metric TQO Cross-Reference

Manufacturer / Standard Nominal Designation Key Envelope
ZQM Bearings 560TQO920-1 560 × 920 × 575 mm (T) · 1,560 kg · e = 0.39
Metric TQO / 380000 Mill Series 560×920×575 4R-TRB Nominal metric envelope; verify BEN spacer & seal grooves

Engineering Disclaimer: Cross-references are for nominal boundary comparison (560 × 920 × 575 mm) only. Always verify axial clearance (BEN), bore lubrication grooves, and heat-treatment specification against mill drawings.

Heavy Crane Handling & Commissioning Guidelines

  1. At 1,560 kg total assembly mass, use certified balanced lifting slings and dedicated roll-shop upenders to avoid nicking tapered raceways during chock assembly.
  2. Verify chock bore ovality before pressing outer cups; excessive chock distortion in wide-plate stands causes localized roller overload on outer rows.
  3. Pair with high-viscosity EP circulating oil or heavy-duty extreme-pressure lithium-complex grease matched to mill stand speeds and water-spray exposure.

Frequently Asked Questions — 560TQO920-1

What are the verified dimensions and weight of the 560TQO920-1 bearing?

Per ZQM factory catalogue record P236-R25-single: bore d = 560 mm, OD D = 920 mm, overall width T = 575 mm, axial factors e = 0.39 / Y1 = 1.7 / Y2 = 2.6 / Y0 = 1.7 / K = 1.50, and reference mass 1,560 kg.

What does the higher e = 0.39 factor mean in heavy plate mills?

A higher calculation factor e (0.39 vs 0.33 on narrower TQO bearings) reflects a steeper roller contact angle, giving 560TQO920-1 proportionally stronger bidirectional axial thrust resistance during heavy reversing passes.

Can ZQM perform ultrasonic (UT) and magnetic particle (MPI) NDT on 1,560 kg TQO rings?

Yes. Ultrasonic internal flaw detection and magnetic particle crack inspection on large forged rolling mill rings can be scoped and documented per your purchase drawing and quality protocol.

Should 560TQO920-1 spacers be swapped between chocks during steel mill overhauls?

Never. Every 560TQO920-1 set is factory-ground with matched serialized spacers to guarantee exact bench endplay (BEN); mixing components across sets invalidates clearance and risks seizure.

How can steel plants request engineering drawings and pricing for 560TQO920-1?

Submit your mill stand specification, required BEN clearance, and NDT scope via our Contact page for direct Wafangdian factory response.

Scroll to Top