The ZQM NN3040K is a heavy-duty, 200 mm bore 1:12 tapered bore (K) double-row cylindrical roller bearing built to center large CNC vertical turning lathe (VTL) rotary tables, heavy gantry plano-milling heads, and roll-grinding machine spindles. Verified in ZQM’s factory catalogue (P078-R11-taper) at 200 × 310 × 82 mm (reference mass 22.0 kg), it delivers 644 kN dynamic (Cr) and 1,140 kN static (C0r) radial stiffness at up to 2,000 rpm catalogue speed.
NN3040K Technical Specifications & Dimensions
| Parameter Category | Technical Parameter (Symbol) | Catalogue Reference Value |
|---|---|---|
| Boundary Dimensions & Weight | Bore diameter (d) | 200 mm |
| Boundary Dimensions & Weight | Outside diameter (D) | 310 mm |
| Boundary Dimensions & Weight | Composite ring width (BC) | 82 mm |
| Boundary Dimensions & Weight | Reference mass (Weight) | 22.0 kg |
| Load Ratings & Limiting Speeds | Basic dynamic load rating (Cr) | 644 kN |
| Load Ratings & Limiting Speeds | Basic static load rating (Cor) | 1140 kN |
| Load Ratings & Limiting Speeds | Catalogue reference speed (speed) | 2000 rpm |
| Abutment & Fillet Dimensions | Housing abutment diameter (Da) | 299 mm |
| Abutment & Fillet Dimensions | Minimum chamfer dimension (r12) | 2.1 mm |
| Abutment & Fillet Dimensions | Minimum flange chamfer (r34) | 2.1 mm |
| Abutment & Fillet Dimensions | Maximum fillet radius (ra) | 2 mm |
| Abutment & Fillet Dimensions | Maximum flange fillet radius (rb) | 2 mm |
Data source: ZQM Bearings online catalogue database (factory PDF catalogue v1). Load ratings, limiting speeds, and parameters without individual test records serve as catalogue reference values; verify shaft/housing shoulders (da, db, Da), tolerances, internal clearance, and drawings prior to ordering.
Engineering Capabilities for Heavy VTL Tables & Gantry Milling Heads
- 1,140 kN Static Stiffness for Multi-Ton Workpieces: Dual rows of high-precision cylindrical rollers minimize radial deflection under eccentric heavy-cutting loads on large vertical turning center tables and roll grinders.
- Precision 1:12 (K) Tapered Bore Centering: Axial advancement onto a 1:12 tapered spindle or table center post eliminates radial play per ISO 5753-1 Table 3 (
C1NA / C2NA), achieving micron-grade roundness during heavy interrupted cuts. - Pure Radial Non-Locating Support: With three integral inner-ring ribs and a separable flangeless outer ring, NN3040K handles radial centering exclusively; vertical workpiece gravity and axial cutting forces are carried separately by hydrostatic guideways or a dedicated thrust bearing.
- Verified Mounting Envelope: Catalogue-verified minimum chamfer
r12 = 2.1 mm, maximum filletra = 2 mm, and maximum housing abutmentDa = 299 mm(shaft abutment confirmed against your machine-tool drawing).
Nominal ISO 15 Series 30 Cross-Reference
| Manufacturer | Nominal Designation | Application Verification |
|---|---|---|
| ZQM Bearings | NN3040K | 200 × 310 × 82 mm · 1:12 K · 22.0 kg |
| SKF / FAG | NN 3040 K/SPW33 / NN3040-AS-K-M-SP | Confirm ISO 492 precision grade (P5/SP), W33 groove & C1NA clearance |
| NSK / NTN | NN3040K / NN3040TBKR | Nominal ISO 15 boundary reference only |
Engineering Disclaimer: Cross-references above represent nominal ISO 15 boundary dimensions (200 × 310 × 82 mm) only. Precision tolerance grades (P5 / SP / UP), cage design, and radial clearance must be verified against your VTL or milling head drawing.
VTL Table & Heavy Headstock Commissioning Checklist
- Inspect the 1:12 tapered center post with Prussian blue contact check (target ≥ 80% contact area) before final spacer grinding.
- Check housing bore roundness (
Da max = 299 mm,ra max = 2 mm) so clamping bolts do not transmit lobing distortion into the separable outer ring. - Use controlled grease metering or circulating spindle oil to avoid viscous churning heat during prolonged 1,000–2,000 rpm heavy finishing cycles.
Frequently Asked Questions — NN3040K
What are the verified factory dimensions and load ratings of NN3040K?
Per ZQM catalogue record P078-R11-taper: bore d = 200 mm (1:12 K tapered bore), OD D = 310 mm, width B = 82 mm, dynamic load Cr = 644 kN, static load C0r = 1,140 kN, catalogue speed 2,000 rpm, r12 = 2.1 mm, Da = 299 mm, and mass 22.0 kg.
Why is NN3040K widely used as the radial centering bearing on heavy VTL rotary tables?
Its 1,140 kN static radial capacity and 1:12 tapered-bore clearance control keep massive multi-ton workpieces concentrically centered during heavy roughing and precision finish turning while vertical table weight rests on the thrust guideway.
Does NN3040K support axial weight on a vertical turning lathe?
No. NN3040K has a flangeless separable outer ring and carries radial centering load only. All vertical table and axial cutting forces must be supported by dedicated thrust bearings or hydrostatic pads.
How do I verify clearance reduction on a 200 mm 1:12 tapered bore?
Measure outer-envelope expansion directly with a calibrated dial indicator per ISO 5753-1 Table 3 (C1NA/C2NA), accounting for shaft hollowness, and lock final axial position with a precision-ground spacer ring.
How can heavy machine-tool builders request NN3040K quotations and inspection sheets?
Send your tolerance class (P5 / SP), clearance group, lubrication preference, and quantity via our Contact page for direct factory response within 24 hours.



