NN40 SERIES · DOUBLE-ROW CYLINDRICAL ROLLER BEARING

NN4040 Double-Row Cylindrical Roller Bearing Dimensions & Specifications

NN4040 double-row cylindrical roller bearing: 200 mm bore (d), 310 mm outside diameter (D), 109 mm width (B/C). Review the available technical values below. Matching dimensions alone do not confirm interchangeability between designations or suffixes.

d 200 mmD 310 mmB/C 109 mmCr 890 kNMass 30.4 kg

Nominal Cross-Section & Boundary Dimensions

Unit: mm · Schematic (not to scale)
Double-Row Cylindrical · NN (Ribless Outer)d 200D 310B 109

Schematic cross-section illustrating this bearing family with nominal catalog dimensions for this designation. Verify exact chamfers, cage geometry, and lubrication grooves against engineering drawings.

Technical specifications

Source: ZQM Master Catalogue · Units: mm / kN / kg
Bore d200 mm
Outside diameter D310 mm
Mass30.4 kg
Catalogue dynamic load Cr890 kN
Catalogue static load Cor1730 kN
Mounting dimensions & additional parameters (8)
Abutment dimension Da293 mm
Abutment dimension da216 mm
Minimum chamfer r122.1 mm
Minimum chamfer r342.1 mm
Maximum fillet ra2 mm
Maximum fillet rb2 mm
Catalogue speed (see source conditions) speed2000 rpm
Shared B/C dimension (catalogue column) BC109 mm

Fields without confirmed values are omitted. Final supply configuration and application suitability require technical confirmation.

Selection & installation

Which mounting dimensions are listed for NN4040?

The NN4040 catalogue lists da min = 216 mm; Da max = 293 mm; ra max = 2 mm. Check these symbols against the bearing drawing and the shaft/housing shoulders; they are not shaft or housing fit tolerances.

What is the reference mass of NN4040?

The catalogue reference mass for NN4040 is 30.4 kg. Confirm the supplied assembly and packed shipment weight separately when planning handling or transport.

What are the main dimensions and load ratings of NN4040?

In the ZQM General Catalogue, NN4040 has nominal boundary dimensions of Array. Catalog load ratings: Cr 890 kN, C0r 1730 kN. Confirm exact clearance, cage design and tolerance class against your drawing prior to ordering.

What rib and bore features define NN4040 double-row cylindrical roller bearing?

NN4040 (200 × 310 × 109 mm) is a high-rigidity double-row cylindrical roller design where the NN inner ring carries three integral ribs with a ribless outer ring, serving as a non-locating bearing within its internal axial displacement range. This designation features a cylindrical straight bore for direct shaft mounting.

Related ZQM Products & Engineering Guides

DIRECT FACTORY SOURCING

Request a Quote for NN4040

Share your required quantity, clearance (CN/C3/C4), and destination with ZQM Bearings. Mixed-model trial lots and OEM drawings welcome.

Scroll to Top